Loading ...
Loading ...
Loading ...
Installation and Setup 16
Updating S1 Firmware
After installing EuControl, make sure your S1 is running the latest firmware. The firmware is provided within EuControl, so an In-
ternet connection is not required.
To update S1 firmware:
1 Click (Mac) or double-click (Windows) the EuControl icon and select EuControl Settings.
2 If necessary, click Surfaces to display the Surfaces tab.
3 Click Avid S1 in the My Surfaces list so it is highlighted.
4 Click Update Firmware. If the Update Firmware dialog shows a message that the surface is up to date, no further action is nec-
essary.
5 If the firmware needs to be updated, follow the instructions in the Update Firmware dialog box to proceed, and make sure to ob-
serve the following guidelines when updating firmware:
• Ensure that S1 is connected to a trustworthy power source.
• Do not power off the S1 during the update or attempt to interrupt the update.
The status of the firmware update is shown on the S13 displays as well as in the EuControl dialog.
6 Click Done when the firmware update is complete.
7 Repeat for any additional S1 or other Avid control surfaces, selecting and then updating their firmware one unit at a time.
8 Proceed to Enabling EUCON in Pro Tools.
Surfaces tab (Dock shown)
If S1 does not appear in the My Surfaces list, add it manually. See 3– Add.
Loading ...
Loading ...
Loading ...