Loading ...
Loading ...
Loading ...
Note: Theappearanceofyourovencontrolmaydifferslightlyfromtheoneillustratedbelow.
However,allfunctionsarethesame.Also,pushbuttonsorpadsmaybeshaped
differentlythanthoseappearinginthisUseandCareGuide.
Control Pad
Functions
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of
your oven, become familiar with the various functions of the oven as described below.
OFF CANCEL PADi Used to clear
any function previously entered
except the time of day and minute
timer. Push OFF CANCEL to stop
cooking. \
BAKE PADi •
Usedto
enter the normal
baking mode
temperature.
BROILi Used
to select the o
variable broil_
function.
CLEAN PADi
Used to select
UP and DOWN ARROWS PADS i Used along with
the function pads to select oven temperature,
cooking time, stop time (when programming an
automatic stop time), time of day, clean time and
minute timer.
thecycle,self-cleaning /
OVEN, PREHEAT & LOCK LIGHTSi The "OVEN" light will glow each
time the oven unit turns on to maintain the set oven temperature. The
"PREHEAT" light will glow when the oven is first set to operate, or if the
desired temperature is reset higher than the actual oven temperature.
The "LOCK" light will flash until the door locks when the self-clean
cycle is in use. It glows constantly after the door locks.
_ OVEN
_l PREHEAT
CLEAN
DOOR LOCKED .....................................................
/
CLOCK PADi
Used to set the
time of day.
/ /
C sOCcoo
o@o
STOP
TIMER PAD i Used to set
or cancel the minute timer.
The minute timer does not
start or stop cooking.
FEATURE
INDICATOR
LIGHTSiThese
light to show
which feature is
in use.
BAKE TIME
PAD i Used
to enter the
length of the
baking time
(if equipped).
STOPTIME
PAD i Used _<_°_
Z
to set the _2_
desired stop _....
time for _
baking. Can :ZC:
be used with
BAKE TIME to
program a
delayed bake
cycle (if
equipped).
The oven can be programmed to: BAKE normally, TIME BAKE, BROIL, SELF-CLEAN
Note: The oven function will not work if the time of day clock is not set.
For a silent control panel:
When choosing a function, a beep will be heard each time a pad is pushed. If desired, the controls can be programmed for
silent operation. Push and hold STOP TIME pad T,M_.After 7 seconds, the control will beep once. This will block the controls
from sounding when a pad is pushed. To return the sound, push and hold STOP TIME pad aga n for 7 seconds until 1
beep is heard.
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. Temperature
The oven can be programmed for any temperature from 170°F to 550°F (65°C to 287°C).
To change the temperature to °C (celsius) or from °C to °F (control should not be in a
Bake or Clean mode):
1. Push BROIL pad "-- appears in the display.
2. Push and hold the UP ARROW A pad until "HI" appears in the display.
3. Push and hold BROIL pad until °F or °C appears in the display.
4. Push UP A or DOWN ARROW V pad to change °F to °C or °C to °F.
5. Pushany function pad to return to normal operating mode.
Conversion
(Fahrenheit / Celsius)
Loading ...
Loading ...
Loading ...