Loading ...
Loading ...
Loading ...
English 13
Initial startup
Adjusting the push handle
Note
The push handle is folded down on delivery of the device. It can
be adjusted to 3 different heights for work.
1. Fold the push handle up into the desired position. Make sure
that the grooves engage correctly in the bolts (fixing).
2. Tighten the star screws hand-tight.
Opening/closing the cover
몇 CAUTION
Risk of crushing fingers
Only use the recessed grip provided to open and close the cover.
ATTENTION
Risk of burns from a hot drive motor
The drive motor can get hot during operation.
Do not touch hot surfaces. Pay attention to the warning symbols.
Note
It is necessary to open the cover:
● For maintenance and cleaning work
● For changing/cleaning the dust filter and pre-filter
● For storing a replacement battery.
1. Opening the cover: Grasp the device cover by the recessed grip
and slowly swivel it forward. A strap holds the device cover.
2. Closing the cover: Slowly swivel the device cover back.
Installing the side brush
The side brush is supplied with the device on delivery and must
be attached to the device before initial startup.
See chapter "Changing the side brushes".
Charging/inserting the battery pack
Charge the battery pack before the initial startup.
Please observe the instructions for charging and operation in the
operating instructions and safety instructions enclosed with the
battery pack and charger.
1 Insert the charged battery pack into the battery holder and
push it in completely. Make sure that it clicks into place.
Dust bag (option)
A dust bag can be inserted into the waste container for easy and
safe disposal of the waste. The dust bag is fastened in the waste
container with clips.
Note
The fastening clips are supplied separately with the device and
must be fitted before using a dust bag for the first time. Please ob-
serve the installation instructions enclosed with the fastening
clips (5.956-669.0).
Inserting the dust bag
1. Actuate the waste container lock (pull backwards).
2. Tilt the waste container to the rear and pull it out.
3. Fold the fastening clips on the front of the waste container out-
wards.
4. Insert the dust bag in the waste container and fold it over the
edge.
5. Close the fastening clip again.
6. Insert the waste container and push it all the way forward.
7. Check whether the waste container has clicked into place.
Note
Removing the dust bag is performed in reverse order.
Operation
Information on sweeping operation
몇 CAUTION
Risk of damage
Carry out cleaning work in the forward travel direction.
Do not carry out any cleaning work with the waste container re-
moved.
Do not let the device run in place with the roller brush switched on.
Do not sweep parcel tape, pieces of string or similar items (dam-
age to the sweeping mechanics).
Note
Adjust the sweeping speed to the conditions in order to achieve
optimum cleaning results.
Loading ...
Loading ...
Loading ...