Loading ...
Loading ...
Loading ...
11
1830007702_DG8624U1_110x154_41/19 Page
11
EN
Iron temperature control setting:
Your iron is quick to heat up so start
with fabrics to be ironed at a low
temperature and finish with those
which need higher temperatures.
Mixed fibre fabrics: set the ironing
temperature to the setting for the most
delicate fabric. For delicate fabrics (•),
press the steam trigger (under the
handle of the iron) intermittently to
avoid any water droplets appearing
with the steam. If you set your
thermostat to “min”, the iron will not
become hot.
6 • Vertical steam ironing
•
Set the temperature of the iron to the max
position.
•
Hang the garment on a coat hanger and
hold the fabric slightly taut with one hand.
•
Press repeatedly on the steam - fig.11
steam trigger (beneath the iron handle)
moving the iron from top to bottom - fig. 12.
Examples of how to use the vertical
steaming function:
•
Removing creases directly on hangers
from delicate fabrics that you do not want
to bring into contact with the hot iron.
•
Refreshing a shirt or a suit just before
putting it on.
As steam is very hot: never attempt
to remove creases from a garment
while it is being worn, always hang
garments on a coat hanger. For fabrics
other than linen or cotton, hold the
iron a few centimetres from the
garment to avoid burning the fabric.
7 • Dry ironing
• Do not press the steam trigger.
8 • Fill the water tank again
• When there is no more steam and the
“Water tank empty” light flashes - fig. 13:
the water tank is empty.
•
Press the ON / OFF button. Unplug your product.
•
Remove the water tank using the handle (on
the front of the steam station) - fig. 14 and
fill it - fig. 5 do not fill above the Max. level.
•
Push the water tank into position until it
“click” into place. Plug your product. Press
the ON / OFF button located on the control
panel. Press the Restart button located on
the control panel. The red light turns off.
•
The steam station and the iron are ready for
use when the MAX button light is on and the
iron temperature control light goes out.
9 • Storing the steam station
•
Turn off the appliance and unplug
it. Place the iron on the iron rest on
the steam station. Lock the iron onto
the base unit by pressing it until you
hear an audible “click”, so your iron is
secure – fig 1. Fold the steam cord in
two and place it in its housing.
•
Leave the steam station to cool for at least
one hour before putting it away if it is to
be stored in a cupboard or confined
space. You can then store your steam
station safely.
10 • «AUTO-OFF» System
• For your safety, the steam generator is
fitted with an «AUTO-OFF» monitoring
system, which is activated automatically
after approximately 8 minutes without use.
• Only the «ON-OFF» button flashes to
indicate that the appliance is on standby.
• To reactivate the steam generator:
- Press the «ON-OFF» button.
- Wait for the «MAX» button light to stop
flashing before starting your ironing again.
• For your safety, after approximately
30 minutes of non-use, the «AUTO-OFF»
When taking a break from ironing,
never place the iron on a metal rest
plate, which could damage the iron
rest plate of the unit. It is equipped
with non-slip pads and has been
designed to withstand high
temperatures.
If this occurs, remove the excess
water.
Loading ...
Loading ...
Loading ...