Loading ...
Loading ...
Loading ...
13
ASSEMBLY
STEP 4
4a. Left Foot Bar Installation –Insert the Left Bracket Bolt (13L) along with a Wave Washer (15)
through the U Shaped Bracket (20) located on the back of the Left Foot Bar (2L). Secure the Left
Bracket Bolt (13L) to the Left side of the Crank (75) by turning the Bolt Counter-Clockwise.
Tighten the Left Bracket Bolt (13L) with the 8mm Allen Wrench provided. Next, install a Spring
Washer (17) and Left Nylon Nut (14L) on the remaining threads of the Left Bracket Bolt (13L).
Turn the Left Nylon Nut (14L) in a Clockwise direction, and then tighten using the 8mm Allen
Wrench and Multi Hex Wrech provided. Then place the Nut Cap (28) onto the Head of the Hex
Bolt (23).
4b. Right Foot Bar Installation – Repeat the above assembly steps to install the Right Foot Bar
(2R) into the Right Crank (75). When installing the Right Pedal Bolt (13R) turn the Right Pedal
Bolt (13R) CLOCKWISE and the Right Nylon Nut (14R) COUNTER-CLOCKWISE.
8mm Allen Wrench
1PC
TOOLS
Multi-Hex Wrench
1PC
Loading ...
Loading ...
Loading ...