Loading ...
Loading ...
Loading ...
Stopwatch
The stopwatch measures elapsed time in
1/1000-second units for the first hour, and in
1/10-second units after that for up to 24 hours.
In addition to normal elapsed time
measurements, the stopwatch also lets you
measure lap times.
Note
●
Up to 200 lap time records can be
stored in watch memory. You will not
be able to store any more lap times
when there are already 200 records in
memory.
●
You can use the Recall Mode to view
the latest measurement data.
l
Viewing Measured Data Records
●
If you want to keep previous elapsed
time measurement data from being
deleted, transfer it to a phone.
l
Viewing Stopwatch Data
Measuring Elapsed Time
1. Enter the Stopwatch Mode.
l
Navigating Between Modes
2. Use the operations below to measure
elapsed time.
E
A
E
A
Stop
Resume
Stop
Start
●
Elapsed time is shown in 1/1000-
second units for the first hour of the
measurement session. After the first
hour, elapsed time is shown in 1/10-
second units.
After first hour
Seconds, 1/10 seconds
Hours, minutes
Minutes,
seconds
1/1000 seconds
First hour
3. Press (A) to reset the measurement time
to all zeros.
Measuring Lap Times
1. Enter the Stopwatch Mode.
l
Navigating Between Modes
●
If a stopwatch timing operation is in
progress, press (A) to stop it and then
press (A) again to reset the stopwatch
to all zeros before performing the
operation in step 2.
2. Use the operations below to measure
elapsed time.
●
Each press of (E) causes the elapsed
time of the section (lap time) to be
shown for eight seconds.
E
E
A
Stop
Start
Lap
●
Elapsed time is shown in 1/1000-
second units for the first hour of the
measurement session. After the first
hour, elapsed time is shown in 1/10-
second units.
After first hour
Seconds, 1/10 seconds
Hours, minutes
Minutes,
seconds
1/1000 seconds
First hour
3. Press (A) to reset the measurement time
to all zeros.
Watch Operation Guide 5707
22
Loading ...
Loading ...
Loading ...