Casio ECB-950MP

User Manual - Page 19

For ECB-950MP.

PDF File Manual, 32 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Alarm
The watch will beep when an alarm time is
reached. You can set up to five different
alarms. The hourly time signal causes the
watch to beep every hour on the hour.
The alarm sound is muted in the cases
described below.
ー 
When battery power is low
ー 
When watch is at Level 2 power saving
l
Power Saving Function
Using CASIO WATCHES to
Configure Alarm Settings
If the watch is paired with a phone, you can
also use CASIO WATCHES to set alarms.
l
Configuring Watch Settings
Configuring Alarm Settings
1. Enter the Alarm Mode.
l
Navigating Between Modes
2. Press (E) to scroll through alarm numbers
([AL1] to [AL5]) until the alarm you want to
configure is displayed.
Alarm number
Alarm time
3. Hold down (A) for at least two seconds.
Release the button when the hours digits
start to flash.
This is the setting mode. The hands
automatically shift out of the way for
easy viewing of the display and other
indicators.
While the setting is being configured,
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
Alarm hour
4. Use (B) and (E) to change the hour setting.
Holding down (B) or (E) scrolls through
settings at high speed.
If you are using 12-hour timekeeping,
[P] indicates p.m.
5. Press (D).
This causes the minutes digits to flash.
Alarm minute
6. Use (B) and (E) to set the minute setting.
7. Press (D).
This causes the alarm type to flash.
8. Use (E) to specify an alarm type.
[DAILY]: Alarm sounds every day at the
alarm time.
[1TIME]: Alarm sounds only once at the
alarm time.
[SCH]: Alarm sounds on the specified
date.
l
Configuring Schedule Alarm Settings
9. Press (A) to exit the setting screen.
Testing the alarm
In the Alarm Mode, hold down (E) to sound the
alarm.
To stop the alarm
Pressing any button while the beeper is
sounding stops it.
Note
A beeper sounds for 10 seconds when
an alarm time is reached.
The watch will automatically return
from the Alarm Mode to the
Timekeeping Mode if you do not
perform any operation for about two or
three minutes.
Watch Operation Guide 5707
19
Loading ...
Loading ...
Loading ...