Loading ...
Loading ...
Loading ...
12
Using Remote for MP3/WAV, Data Play-
back
Load a DATA (CD or DVD) or MP3/WAV Disc
into the MCD12000. The MCD12000 has different
Operational Playback Modes when a Disc contains
DATA music files. The Operational Mode Selection
includes the “All Mode” and the “Folder Mode”, which
are indicated by the Front Panel Display.
To check the current Operation Mode, press the
MODE button on the Remote Control once. To change
the current Operation Mode, press the MODE button
twice, followed by pressing the PLAY button to
activate the selected Operation Mode.
When conventional CD or SACD DISCs are played,
all the sound tracks are sequentially numbered and
are played back in that numeric order. This standard
playback mode is referred to as the “All Mode” of
operation.
CD Data, DVD Data, and MP3/WAV Discs are
usually created on a computer, which can create
multiple folders that are in a sequential order. Each
folder can contain multiple sound tracks that are in a
sequential order. This playback mode is referred to as
the “Folder Mode” of operation. Refer to “Front Panel
Display” for an example of the Front Panel Indications
of the Folder Mode content.
All Mode
Folder Mode
Front Panel Display
When playing a Data CD Disc or Data DVD Disc, the
MCD12000 Front Panel Information Display will also
indicate the following:
• Folder or Sub-Folder Name - Music One
• Artist Name - Freddie King
• Album Name - Getting Ready
• Track Name - 09 Tore Down
• Audio Format Type and Sampling Frequency - WAV
44.1kHz
Getting Ready-
Freddie King -
Music One
09-Tore Down.
WAV 44.1kHz
Folder Symbol
Upper and Lower Symbol
Music Symbol
After the Folder Mode has been selected, the Front
Panel Information Display will indicate the Folders,
Sub Folders, and Tracks. It also indicates the Album
Name, the Artist Name, the Track Name, and the
Track Time, along with the Audio Format Type
and Sampling Frequency. Due to the operational
differences of various computers and the MCD12000,
sequel listing of the Folders, Sub Folders and Tracks
will usually be different. If the All Mode on the
MCD12000 was selected, the sequential listing will
also be different.
Display Brightness
There are three available Settings for the Front Panel
Display. The choices include brightness settings of
high (default setting), medium or low. To change the
brightness setting perform the following steps:
1. Select CD Player/ DISC Input
2. Press the SHIFT Push-button.
3. Momentarily press the 2 (DIM) button to change
the current brightness setting. Repeat this until the
desired brightness setting is selected.
Loading ...
Loading ...
Loading ...