Loading ...
Loading ...
Loading ...
the machine nameplate, properly
grounded, and coupled with applicable
switches and circuit breakers. Never
operate the machine near flammable or
explosive objects.
• No technical modifications to the
machine
• Please do not spray rinsing the machine
• Be sure to follow the instructions to
operate the machine
• Please do not mount the machine on
other devices
•
Please do not wash with benzene or other
dissolved substances
•
Never block the vents on the side of the
machine
Before cleaning the machine, make sure
the machine has been disconnected from
the power.
The machine must be repaired by our
service center or a trained technician.
* Damage due to improper operation will
void our warranty, and the Factory will
not be responsible for personal injury or
property damage.
2.2. Stop Function
Turn off the main switch to stop the
machine.
3. Operation and Storage
All operations described in Chapter 4 must
be carried out by professionals in charge of
transporting/handling packaged or
unpackaged products.
Be sure to use appropriate equipment
depending on the nature and weight of the
goods, as well as relevant stipulations of
local regulations.
3.1. Packaging
The goods to be shipped shall be packaged
and fixed with foam inside, and cardboard
boxes outside.
3.2. Transport and Handling
In case of physically works needed, it must
be completed by at least two people.
1) The machine must stay upward when
being moved.
2) Pay attention to the packaging and
protruding parts.
3.3. Storage
The machine should be cleaned and
disinfected before it is put into the
warehouse.
If the machine is to be put idle for a long
time, protective measures must be taken
for its placement location and storage
time:
1) The machine shall be placed in enclosed
space
2) Prevent the machine from being hit and
squeezed
3) The machine should be placed in a cool
and dry place, not exposed to moisture
and high temperature
4) Keep the machine away from corrosive
substances
4. Installation
The machine must be installed in a bright,
well-ventilated room with a hard solid
floor.
4.1 Mounting Location
1. The floor for the machine to be
mounted
on must be firm and flat.
2.The space should be bright,
well-ventilated and clean
3. Sufficient clearance shall be provided to
facilitate unrestricted operation as well as
emergency use. *TIP: Leave 25 cm (10 in.)
clearance on the top of the bowl.
* Before using the machine for the first
time, all the parts must be cleaned, and
the parts that are in contact with the slush
need to be handled carefully; for more
details, please read relevant section.
4.2. Power Connection
Make sure the main switch is at "0" before
you plug in.
Warning: The power socket must be
arranged in a place easily accessible by the
user.
5. Operation
Before the machine is started for the first
time, it must be checked by a professional
technician to see whether its function can
work well.
5.1. Material Preparation
Pour the material into the bowl when the
machine is off and unpowered.
Warning: Minimum sugar content should
not be less than 13% as low concentration
may damage the machine.
Remove the lid from the bowl according to
the following instructions:
1. Lift the back of the lid;
2. Remove the lid from the front retainer.
3. After material was added to the bowl,
the lid on the bowl should be put back.
Loading ...
Loading ...
Loading ...