Loading ...
Loading ...
Loading ...
Warning:
1) Please do not open the lid forcibly.
2) Never add liquid higher than 25 degrees
Celsius
3) When feeding the bowl, be careful not
to exceed the maximum limit and must
exceed mixer shaft.
4) Please do not turn on the machine when
the lid is not in place. Please turn off and
unplug the machine before removing the
lid.
5) Please turn off and unplug the machine
before removing any parts from the bowl
5.2. Starting the Slush Machine
Refer to 1.4. Control Panel Description and
Function
5.3. Slush Concentration Adjustment
Refer to 1.4.2 to Set up Parameters; the
bigger position corresponds to thicker
slush
5.4. Slush Production
Pull the handle to produce the slush.
If the machine is not to be used
continuously, the following operations are
required in case of dairy products:
1) Spray water onto the faucet and
surrounding area.
(Use a clean cloth to wipe for disinfection
at the same time)
2) Before making slush for the customer,
please use a small amount of product to
try first.
5.5 Emergency Situations
1) In extreme emergencies, set the main
switch to "0" to turn off the machine.
2) If the machine is stuck, turn off the
machine, and contact the service center or
a professional technician.
6. Cleaning and Maintenance
Prior to any cleaning and maintenance of
external components of the machine,
make sure the main switch is located at
position 0 and the machine is not plugged
in.
For cleaning and maintenance, follow
these instructions:
1. Put on protective gloves
2. Never use soluble and explosive
materials
3. When the machine is powered on and
the main switch at position "1", cleaning is
prohibited.
6.1 Empty the Bowl
Before cleaning the bowl, please first
remove all the previously prepared
material
6.2. Disassemble the handle parts
Please do not dismantle the handle of the
machine if there is material or other liquid
in the bowl
6.3 Remove the bowl and lid
Remove each bowl to ensure that the
machine is neat and clean.
Remove the bowl as follows:
1. Remove the lid as shown in the figure.
2. Raise the front part of the bowl to
loosen it.
3. Gently push and rotate its back to
remove the bowl
4. Take out the mixer shaft and remove the
seal ring
Loading ...
Loading ...
Loading ...