Loading ...
Loading ...
Loading ...
1. Product Description
1.1. Product Usage
This machine is suitable for making slush
and cold drinks, and the operation of this
slush machine must comply with current
standards.
1.2. Main Parts
The main components of
the machine are as follows:
1. Bowl lid
2. Bowl
3. Discharge wrench
4. Discharge port
5. Control Panel
6. Chassis
7. Water tray
1.3. Technical Parameters
Model: please see nameplate
Size: please see nameplate
Maximum output power (watts): please
see nameplate
Operating voltage (volts): please See the
nameplate on the side of the machine
Operating ambient temperature range:
from 5 degree to 32 degrees
Bowl Number: 1/2/3
Single bowl capacity (L):15
Sound pressure level: minimum 70 dB
Grade: N
* Tip: The Factory reserves the right to
alter the machine without prompting.
1.4Control Panel Description and Function
1.4.1 Panel Diagram:
1.4.2 Introduction of Function and Set
Parameters
( Model:X-150)
1. Press “Mixing key”, turn on mixing
function, mixing light is on. Press
“Mixing key” again to turn off the mixing
function.
2. Press the “Cold Drink key” (mixing
function must be turned on, otherwise
the Cold Drink key does not work), turn
on the cold drink function, and cold
drink light is on (the compressor is
powered on) or cold drink light flashes
(compressor is powered off), then press
the “Cold Drink key” again to close the
cold drink function.
3. Press the “Slush key” (mixing function
must be turned on, otherwise the Slush
key does not work) to open the slush
function, and slush light is on (the
compressor is powered on) or slush light
flashes (compressor is powered off),
then press the Slush key again to close
the slush function.
4. Press the “Lighting key” to turn on the
light, and then press the “Lighting key”
again to turn off the light.
5. Press "Set key", enter the user
parameter setting state. At this time,
press the “Set key” to change the setting
object, press "Set key(-)" and “temp
setting key(+)”to change the value. After
5 seconds without operating the key, the
system will exit and save the setting
value automatically.
Model
Code
Factory
Setting
Meaning
X-150
SL1
-2.0℃
Slush temperature
Cd1
5.0℃
Cold drink temperature
X-300
SL1
-2.0℃
Slush temperature for left
bowl
SL2
-2.0℃
Slush temperature for right
bowl
Cd1
5.0℃
Cold drink temperature for
left bowl
Cd2
5.0℃
Cold drink temperature for
right bowl
X-450
S1
-2.0℃
Slush temperature for left
bowl
S2
-2.0℃
Slush temperature for middle
bowl
S3
-2.0℃
Slush temperature for right
bowl
C1
5.0℃
Cold drink temperature for
left bowl
C2
5.0℃
Cold drink temperature for
middle bowl
C3
5.0℃
Cold drink temperature for
right bowl
Code
Factory Setting
Meaning
P00
0.2 (Degrees)
Slush temperature return
difference value
P01
0 (Degrees)
The maximum setting
temperature
P02
-15.0 (Degrees)
The minimum setting
temperature
P03
10 (Minutes)
Press protection time
P04
110V:85(V)
220V:185(V)
Low voltage protection
value
P05
1 (0: Disable 1:
Enable)
Voltage protection enabled
P06
0.0
# 1 bowl temperature
correction
P07
0.0
# 2 bowl temperature
correction
P08
0.0
# 3 bowl temperature
correction
P09
2.0 (Degrees)
Cold drink temperature
return difference value
Loading ...
Loading ...
Loading ...