Loading ...
Loading ...
Loading ...
Fig. 37
If the drawer is in the top freezer:
u
Lift up the drawer at the front
Fig. 37 (1)
.
u
Take out to the front
Fig. 37 (2)
.
u
Slide the rails in.
Fig. 38
If the drawer is in the middle part of the freezer compart-
ment:
u
Pull out the drawer half-way.
u
Lift it up at the back from below
Fig. 38 (1)
.
u
Take out to the front
Fig. 38 (2)
.
u
Slide the rails in.
7.6.2 Inserting the drawer
Drawer without a pull-out system
Fig. 39
u
Insert the drawer as shown.
Drawer on telescopic rails
Fully extendible:*
Fig. 40
*
u
Slide the rails in.*
u
Place the drawer on the rails.*
u
Push all the way back.*
w
Fully extendible: Latches in audibly at the back.*
Partial pull-out fridge compartment:*
Fig. 41
*
u
Slide the rails in.*
u
Place the drawer on the rails.*
u
Push all the way back.*
Partial pull-out freezer compartment
Fig. 42
u
Slide the rails in.
u
Guide the drawer around the stoppers
Fig. 42 (1)
.
u
Place the drawer on the rails.
u
Push all the way back.
7.7 EasyFresh-Safe cover
You can remove the compartment cover for cleaning.
7.7.1 Removing the compartment cover
Fig. 43
When the drawers are removed:
u
Pull the lid up at the front to the opening in the retaining
parts
Fig. 43 (1)
.
u
Lift from the back and pull it up and out
Fig. 43 (2)
.
7.7.2 Inserting the compartment cover
Fig. 44
If the text THIS SIDE UP points upwards:
u
Insert the lip of the cover over the opening of the rear
bracket
Fig. 44 (1)
and click into place
Fig. 44 (2)
.
u
Position the cover where you want it (see 7.8 Adjusting the
moisture levels) .
7.8 Adjusting the moisture levels
You can adjust the moisture in the drawer yourself by adjusting
the compartment cover.
The compartment lid is attached to the drawer and can be
hidden by a shelf or additional drawers.
Features
16 * Depending on model and options
Loading ...
Loading ...
Loading ...