Loading ...
Loading ...
Loading ...
©
2022 DJI All Rights Reserved.
47
DJI Mini 3 Pro
User Manual
DJI RC-N1
When used with DJI Mini 3 Pro, DJI RC-N1 features OcuSync O3 video transmission, works at
both 2.4 GHz and 5.8 GHz frequency bands, is capable of selecting the best transmission channel
automatically, and offers 1080p 30fps HD live view transmission from the aircraft to DJI Fly on a
mobile device (depending on mobile device performance) at a maximum transmission range of 12 km (7.5 mi)
(compliant with FCC standards, and measured in a wide open area without interference). Users can
control the aircraft and change the settings easily within this range. The built-in battery has a capacity
of 5200 mAh and power of 18.72 Wh that supports a maximum run time of six hours. The remote
controller charges Android mobile devices automatically with a charging rate of 500 mA@5 V. Charging
for iOS devices is disabled by default. To charge iOS devices, make sure that the charging function is
enabled in DJI Fly each time the remote controller is powered on.
Compliance Version: The remote controller is compliant with local regulations.
Control Stick Mode: The control stick mode determines the function of each control stick movement.
Three pre-programmed modes (Mode 1, Mode 2, and Mode 3) are available and custom modes can
be congured in DJI Fly. The default mode is Mode 2.
Powering On/O
Press the power button once to check the current battery level. If the battery level is too low, recharge before
use.
Press once then press again and hold for two seconds to power the remote controller on or o.
Charging the Battery
Use a USB-C cable to connect a USB charger to the USB-C port of the remote controller.
Controlling the Gimbal and Camera
Shutter/Record Button: Press once to take
a photo or to start or stop recording.
Photo/Video Toggle: Press once to switch
between photo and video mode.
Shutter/Record
Button
Photo/Video
Toggle
Gimbal Dial
Customizable
Button
Loading ...
Loading ...
Loading ...