Loading ...
Loading ...
Loading ...
©
2022 DJI All Rights Reserved.
29
DJI Mini 3 Pro
User Manual
Propellers Marked Unmarked
Illustration
Mounting
Position
Attach to the motors of the marked arm
Attach to the motors of the unmarked
arm
Attaching the Propellers
Attach the marked propellers to the motors of the marked arm, and the unmarked propellers to the
motors of the unmarked arm. Use the screwdriver from the aircraft package to mount the propellers.
Make sure the propellers are secure.
MarkedUnmarked
Make sure to only use the screwdriver from the aircraft package for mounting propellers. Using other
screwdrivers may damage the screws.
Make sure to keep the screws vertical while tightening them. The screws should not be at a tilted
angle to the mounting surface. After installation is complete, check whether the screws are ush and
rotate the propellers to check for any abnormal resistance.
Detaching the Propellers
User the screwdriver from the aircraft package to loosen the screws and detach the propellers from the
motors.
Propeller blades are sharp. Handle with care.
The screwdriver is only for mounting the propellers. DO NOT use the screwdriver to disassemble the
aircraft.
If a propeller is broken, remove the two propellers and screws on the corresponding motor and
discard them. Use two propellers from the same package. DO NOT mix with propellers from other
packages.
Only use ocial DJI propellers. DO NOT mix propeller types.
Purchase additional propellers if necessary.
Make sure that the propellers and motors are installed securely before each ight. Check to make
sure the screws on the propellers are tightened after every 30 hours of ying time (approx. 60 ights).
Make sure all propellers are in good condition before each ight. DO NOT use aged, chipped, or
broken propellers.
To avoid injury, stand clear of and do not touch propellers or motors when they are spinning.
Loading ...
Loading ...
Loading ...