Loading ...
Loading ...
Loading ...
Operating the appliance en
15
OTime-setting options
Setting the time
Ti me- s et t i ng opt i ons
Note: If the time is not set, the oven will not switch on.
On the first use, or after a power failure, the digits and
0 flash on the display.
1. Press 0 for 2 seconds.
The dot between the hours and the minutes flashes.
The symbol = is shown fixed above the dot.
2. Use the + or - button to set the clock.
Note: Keep the button pressed in to increase or
decrease rapidly.
3. Wait 7 seconds.
The dot between the hours and the minutes stops
flashing. The time that has been set is adopted.
Notes
■ To change the set time, press the + and - buttons at
the same time for two seconds, then set the current
time with the + and - buttons.
■ If the programmer is not in timed cooking or
programmed cooking mode, you can use oven
functions manually.
Setting timed cooking
Timed cooking is the function which allows the user to
set a duration for the cooking operation. When duration
time is passed, the cooking operation is automatically
ended.
1. Press 0 until V appears.
2. Press 0 again.
The display will show the digits 0.00 and the text dur
in sequence, while A flashes.
3. Use the + or - button to set the required minutes of
cooking.
4. Wait 5 seconds without pressing any key in order for
the function to activate.
The current time and A appear on the display.
5. Select a function and a cooking temperature.
6. When cooking is completed, an audible signal
(buzzer) will be heard.
7. To turn off the buzzer just press any key of the
programmer clock.
8. Return function and temperature knobs to 0 position.
9. Press 0 to reset the programmer clock.
Notes
■ At the end of cooking the heating elements will be
deactivated. On the display, = turns off, A flashes
and the buzzer sounds.
■ It is not possible to set a cooking time of more than
10 hours.
■ To reset the set program, press + and - buttons at
the same time.
■ To display the cooking time remaining after setting,
press 0 for 2 seconds. Press 0 again. The display
shows the text dur and the remaining cooking time in
sequence.
Setting programmed cooking
Programmed cooking is the function which allows the
user to set a duration and specify a time at which
automatically end the cooking operation.
1. Press 0 until V appears.
2. Press 0 again.
The display will show the digits 0.00 and the text dur
in sequence, while A flashes (for example the current
time is 17:30).
3. Use the + or - button to set the required minutes of
cooking (for example 1 hour).
4. Press 0.
The text End will appear on the display in sequence
with the pre-set cooking duration added to the
current time (The display shows the current cooking
end time. For example 18:30).
5. Use the + or - button to set a new cooking end time
(for example 19:30).
Note: Bear in mind that a few minutes for oven
preheating must be added to the cooking time.
6. Wait 5 seconds without pressing any key in order for
the function to activate.
The current time and A appear on the display.
7. Select a function and a cooking temperature.
8. Symbol = disappears from the display. Cooking
operation does not start until the planned time (for
example, 18.30), that is the difference between the
cooking end time and the cooking duration
time.Press + and - at the same time to reset the set
program.
9. When cooking is completed, an audible signal
(buzzer) will be heard.
10. To turn off the buzzer just press any key of the
programmer clock.
11. Return function and temperature knobs to 0 position.
12. Press 0 to reset the programmer clock.
Notes
■ At the end of cooking the heating elements will be
deactivated. On the display, = turns off, A flashes
and the buzzer sounds.
■ It is not possible to set a cooking time of more than
10 hours.
■ It is not possible to set a programmed cooking time
of more than 24 hours.
■ To reset the set program, press + and - buttons at
the same time.
■ To display the cooking time remaining after setting,
press 0 for 2 seconds. Press 0 again. The display
shows the text dur and the remaining cooking time in
sequence.
Loading ...
Loading ...
Loading ...