Loading ...
Loading ...
Loading ...
Before using for the first time en
13
Baking out the oven
Precleaning the oven
1. Remove accessories and hook-in racks from the
cooking compartment.
2. Fully remove any remaining packaging, such as
small pieces of polystyrene, from the cooking
compartment.
3. Some parts are covered with a protective film.
Remove the protective film.
4. Clean the outside of the appliance with a soft, damp
cloth.
5. Clean the cooking compartment with hot soapy
water.
Heating up the oven
To remove the new cooker smell, heat up the oven
when it is empty and closed.
1. Turn the temperature selector to the maximum
temperature.
2. Switch off the oven after 45 minutes.
Recleaning the oven
1. Clean the cooking compartment with hot soapy
water.
2. Fit the hook-in racks.
Cleaning the accessories
Before using the accessories, clean them thoroughly
using a cloth and warm soapy water.
Fitting the threaded bushes for the rotary
spit
1. From above, place the threaded bushes into the
holes at the four corners of the universal pan.
2. Counter the ring nuts from below.
3. Use a screwdriver to tighten the threaded bushes.
Fitting the telescopic shelf set
Instructions on fitting the telescopic shelf set are
enclosed with the set.
e cn a i l pp a eh t gn i t a r epO
1Operating the appliance
You have already learnt about the controls and how
they work. Now we will explain how to set your
appliance. You will learn about what happens when you
switch the appliance on and off, and how to select the
operating mode.
Hob
Switching the hob on and off
You can switch the hotplate on and off with the control
knobs.
Setting a hotplate
You can set the heat setting for the hotplates using the
hotplate control knobs. Press the control knob for the
required hotplate and turn it to the required heat setting.
Heat setting 1 = lowest setting
Heat setting 9 = highest setting
Note: Hotplate temperature is regulated by the heat
switching on and off. The heat may also switch on and
off at the highest setting.
Large dual-circuit hotplate and extended cooking
zone
The size of these hotplates can be altered.
Switching on the large area
Turn the hotplate control to position 9 - where you will
feel a slight resistance - then continue turning to õ/ç
symbol = large dual-circuit hotplate or extended
cooking zone
Then immediately turn it back to the desired heat
setting.
Switching back to the small area
Turn the hotplate control to Û and reset.
The small dual-circuit hotplate is particularly good for
heating small amounts.
Caution!
Never turn the hotplate control beyond the õ/ç symbol
to Û.
Oven
Operating the oven
Switching on the oven
Note: Always keep the appliance door closed when it is
in operation.
1. Turn the function selector to the desired operating
mode.
2. Turn the temperature selector to set the desired
temperature.
The oven switches on.
Loading ...
Loading ...
Loading ...