Loading ...
Loading ...
Loading ...
en Operating the appliance
14
The indicator lamp is lit when the oven is heating up. It
goes out during pauses in heating.
N
ote: The indicator lamp also lights up when the
function selector is in the off position and a temperature
is set. The oven only begins to heat up when an
operating mode is set.
Switching off the oven
1. Turn the function selector to the Û position.
2. Turn the temperature selector to the Û position.
The oven switches off.
Rotary spit
Preparing the rotary spit
1. Slide a retaining clip onto the rotary spit and screw
on the handle.
2. Place the roast as close as possible to the centre of
the rotary spit.
3. Use retaining clips to secure the roast in place.
4. Use milled screws to secure the retaining clips.
:Warning – Risk of deflagration!
If the burner does
not ignite after
15 seconds,
switch
off the control knob and open the door or window in
the room. Wait at least 1
minute before igniting the
burner again.
1. Insert the rotary spit frame into the threaded bushes
2. Place the rotary spit onto the rotary spit frame and
unscrew the handle.
3. Slide the universal pan into shelf position 1 and slide
the rotary spit into the motor mount.
4. Close the appliance door.
Switching on the rotary spit
Note: When using the rotary spit, preheat the oven
using the ( type of heating. Only set the G type of
heating once the rotary spit has been inserted.
1. Turn the control knob for the oven to the G position.
2. Set the temperature.
Note: Add some water to the universal pan in order to
catch any fat that drips out.
Inserting the rotary spit
:Warning – Risk of burns!
Never touch the hot surfaces of the cooking
compartment or the heating elements. Children must be
kept at a safe distance from the appliance at all times.
Open the appliance door carefully. Hot steam may
escape.
Removing the rotary spit
:Warning – Risk of burns!
Never touch the hot surfaces of the cooking
compartment or the heating elements. Children must be
kept at a safe distance from the appliance at all times.
Open the appliance door carefully. Hot steam may
escape.
1. Opening the appliance door
2. Slowly pull the universal pan until it is halfway out of
the cooking compartment.
3. Completely remove the universal pan from the
cooking compartment and set it on the worktop.
4. Screw on the handle and remove the grill spit from
the grill spit frame.
Loading ...
Loading ...
Loading ...