Loading ...
Loading ...
Loading ...
( ELECTMODELS)
A light activates within the dispenser area
at full power when dispensing ice or
water.
To dispense ice:
Select cubed or crushed ice mode by
pushing appropriate button on
dispenser control panel. A green
indicator light above button shows
mode selection.
Press container against dispenser
pad. When dispensing crushed ice,
hold container as close to chute as
possible to reduce spraying. Selection
mode may not be changed while ice
dispenser is in operation.
; ;ERPAD
The Dispenser Pad is located on the
back watt of the dispensing area. When
the dispenser pad is pressed, the
selection chosen on the dispenser control
panel will dispense.
NOTE:
During initial use of water dispenser,
there will be a 1- to 2-minute delay
while water tank fills before water dis-
penses. Discard first 10-14 containers
of water after initially connecting
refrigerator to household water supply
and after extended periods of nonuse.
To dispense water:
Choose water selection from dis-
penser control panel.
Press sturdy, wide-mouthed container
against dispenser pad.
Release pressure on dispenser pad to
stop water from dispensing. A small
amount of water may continue to dis-
pense and collect in dispenser tray.
Large spills should be wiped dry.
The Removable Tray at the bottom of
the dispenser area is designed to collect
small spills and may be easily removed
for cleaning and emptying purposes.
IMPORTANT: Removable tray does not
drain. Continuous water running into tray
will cause tray to overflow.
]0
Loading ...
Loading ...
Loading ...