Loading ...
Loading ...
Loading ...
instructions
nuwavenow.com
20 21
ENGLISH
nuwavenow.com
INSTRUCTIONS
20 21
1. Press the ON/OFF
button and adjust your
cooking temperature
and time for stage
cooking.
2. If you want to set a
different temperature
and/or time for Sear
1, press the SEAR
button one time and
adjust the Sear 1
temperature and time.
3. Press the SEAR button
again. The LED display
will show 400F (204C),
"sear," "1," "2," and
"temp."
4. Adjust the Sear 2
temperature and time
if desired.
5. Press the START/
PAUSE button to
begin cooking. The
LED display will show
"sear 1" (ashing),
"2," "time," and the set
sear 1 time with the ":"
ashing.
6. Once the Sear 1 cycle
is complete the unit
will beep one (1) time
and automatically
go into regular stage
cooking. The LED
display will show "sear
2," "time," and the set
regular stage cooking
time (00:15 default)
with the ":" ashing.
7. Once the stage cooking
cycle is complete the
unit will beep one (1)
time and automatically
go into Sear 2 cooking.
The LED display
will show "sear 2"
(ashing), "time," and
the set Sear time
(00:05 default) with the
":" ashing.
8. When the unit is
nished cooking the
LED display will show
"End" and beep three
(3) times.
Sear 2
Default Sear 2 temperature
is 400F (204C) and default
Sear 2 time is ve (5)
minutes (00:05).
1. Press the ON/OFF
button and adjust your
cooking temperature
and time for Stage 1.
2. Press the SEAR button
three (3) times. This
will engage the Sear 2
function.
3. The LED display will
show "400F" ("204C"),
"sear," "2," and "temp."
• Sear 2 searing
temperature can be
adjusted by using the
[↑] and [↓] buttons
above and below the
temperature icon.
400F (204C) is the
maximum searing
temperature.
• Adjust the Sear 2
time by using the
[↑] and [↓] buttons
above and below the
time icon up to ve
(5) minutes (00:05).
4. Press the START/
PAUSE button to
begin cooking.
5. Once the stage
cooking cycle is
complete the unit will
beep one (1) time and
automatically go into
Sear 2 cooking. The
LED display will show
"sear 2" (ashing),
"time," and the set sear
time (00:05 default)
with the ":" ashing.
6. When the unit is
nished cooking the
LED display will show
"End" and beep three
(3) times.
WARM
1. Press the WARM
button to engage the
"Warm" function and
keep your food warm
until you’re ready to
serve.
2. The LED display will
show 140F (60C),
"temp" and "warm."
3. Use the [↑] and [↓]
buttons above and
below the temperature
icon to adjust the warm
temperature.
4. Press the [↑] and [↓]
buttons above and
below the time icon to
adjust the warm time.
The LED display will
show "01:00" (default),
"time" and "warm."
5. Use the [↑] and [↓]
buttons above and
below the time icon to
adjust the warm time.
6. Press the START/
PAUSE button to start
cooking. The unit
will go through the
regular stage cooking
cycle then will go
into "Warm" at the
temperature set as well
as the set time.
Using Warm as an
Independent Function
1. Warm can be used
as an independent
function. Press and
hold the WARM button
for 1 second.
2. The unit will
automatically begin
the warming function
and the LED display
will show "01:00,"
"time and warm."
3. Warm temperature and
time can be adjusted at
this time by using the
[↑] and [↓] buttons.
Sear 1 & 2
Sear 1 & 2 is used to sear
before and after regular
stage cooking.
Loading ...
Loading ...
Loading ...