Loading ...
Loading ...
Loading ...
Installation Instructions
WASHER CONNECTIONS FOR PORTABLE MODEL
WSLP1100--ONE-FAUCET CONNECTIONS
Use the hose connector provided with the washer for a
oile-t;i fleet (-onne('tion.
TO CONNECT THE WASHER:
[] REMOVE THE UNI-COUPLE ®
HOSE FROM INSIDE THE
WASHER BASKET
COLDWater
Suppl,/
Connection
Connector
Uni-CouplerHose
[] CONNECT TO WATER LINE
Attach the hose connector to the Lmcet adapter bv
pulling down on the locking collar while lifting up
on the connector tmtil it snaps into place. Make
sure the water filter provided is in place.
LockingCollar
Hose Connector
[] CONNECT TO VALVE INLET
Attach the COLD water supply connector to the
COLD water valve inlet (color BI,UE). Make sure
the washer is inside the connector befl)re
tightening.
[] TIGHTEN CONNECTOR
Tighten the connector; ensuring the threads are
aligned properly fin" tightest fit. Inspect for kinks
or binding of the hose.
NOTE: Do not remove the plastic cap fl'om the HOT
water inlet fi)r uni4'oupler connections as leakage may
OCC/II;
[] CONNECT DRAIN HOSE
Attach the drain hose to the rear of the washer.
Install the clamp on the drain hose and tighten
to I)rex ent leakage, of water.
13
Loading ...
Loading ...
Loading ...