Loading ...
Loading ...
Loading ...
Installation Instructions
WASHER CONNECTIONS FOR STATIONARY MODELS
WSLS1100 AND WSLM1100
[] FLUSH WATER LINES
Run some water fi'om the hot and cold fimcets to flush
the water lines and remoxe particles that mi_,ht,., clog up
the water xflxe screens.
[] CONNECT TO WATER LINES
Connect the inlet hose ends to the HOT and COLD
water fimcets tightly by hand, then tighten another
mrn with pliers. Tm'n the water on and check fi)r leaks,
[] CAREFULLY MOVE THE WASHER
TO ITS FINAL LOCATION
[]
CONNECT DRAIN HOSE
Fom_ a U shape on the end of the drain hose with the
hose pointed toward the drain. Place the hose in a
latmdrv mb or stnnd pipe and secure it with a cable tie
(not inchlded).
NOTE: If the drain hose is placed in a stand pipe
without tomfing a U shape, a siphoning action could
occm: There must be an air gap arotmd the drain
hose. A snug hose fit can also cause a siphoning action.
CableTie
Laundry Tub
Cable5e
StandPipe
Cable Tie
[] PLUG THE POWER CORD INTO A
GROUNDED OUTLET
Insure proper groun/
exists before use
11
Loading ...
Loading ...
Loading ...