Loading ...
Loading ...
Loading ...
en Cleaning aid
30
20.2 Setting the cleaning function
Ventilate the kitchen while the cleaning function is run-
ning.
WARNING‒Risk of harm to health!
The cleaning function heats up the cooking compart-
ment to a very high temperature so that food left over
from roasting, grilling and baking will burn off. This pro-
cess releases vapours, which can irritate mucous mem-
branes.
▶ Keep the kitchen well ventilated while the cleaning
function is running.
▶ Do not remain in the room for long periods.
▶ Keep children and pets away.
WARNING‒Risk of burns!
The cooking compartment gets very hot when the
cleaning function is in progress.
▶ Never open the appliance door.
▶ Allow the appliance to cool down.
▶ Keep children at a safe distance.
The outside of the appliance gets very hot when the
cleaning function is in progress.
▶ Never touch the appliance door.
▶ Allow the appliance to cool down.
▶ Keep children at a safe distance.
Note:The oven light does not light up while the clean-
ing function is running.
Requirement:→"Preparing the appliance for the
cleaning function", Page29.
1.
Press "Cleaning" in the menu.
2.
Press
"Pyrolytic activeClean".
3.
Use the setting ring to set the cleaning setting.
Cleaning set-
ting
Cleaning
level
Duration in hours
1 Low Approx. 2:15
2 High Approx. 2:30
The duration cannot be changed.
You can delay the time at which the operation
should be ready.
→"Setting the end time", Page16
4.
Press
.
a A notification stating that you should carry out the
necessary preparatory work for the cleaning func-
tion appears on the display.
5.
Confirm the message.
a The cleaning function starts and the duration counts
down.
a For your safety, the appliance door locks once a
certain temperature is reached in the cooking com-
partment.
appears on the display.
a A signal tone sounds when the cleaning function
has finished. A message appears on the display
confirming that the operation has finished.
6.
Press
to switch the appliance off.
7.
→"Preparing the appliance after the cleaning func-
tion", Page30.
Cancelling the cleaning function
You can no longer stop or change the cleaning func-
tion once it has started.
▶
To cancel the cleaning function, press
to switch
the appliance off.
20.3 Preparing the appliance after the
cleaning function
1.
Allow the appliance to cool down.
2.
Wipe off any ash that has been left behind in the
cooking compartment, on the shelf supports and
around the appliance door with a damp cloth.
3.
Slide the pull-out rails out and in several times.
While the cleaning function is running, the rails may
become discoloured. This discolouration does not
compromise the functionality of the appliance.
4.
Remove white residues with lemon juice.
Note:White residues on the enamel surfaces may
be caused by heavy soiling. These food residues
are harmless. The deposits do not compromise the
functionality of the appliance.
Note:While the cleaning function is running, the frame
on the inside of the appliance door or other parts of
the door that are made of stainless steel become dis-
coloured. This discolouration does not compromise the
functionality of the appliance. The discolouration can
be removed using a stainless steel cleaner.
21 Cleaning aid
The cleaning aid
is a quick alternative for occasion-
ally cleaning the cooking compartment. The cleaning
aid softens dirt by evaporating the soapy water. It is
then easier to remove the dirt.
21.1 Setting the cleaning aid
WARNING‒Risk of scalding!
If there is water in the cooking compartment when it is
hot, this may create hot steam.
▶ Never pour water into the cooking compartment
when the cooking compartment is hot.
Note:The oven light does not come on while the clean-
ing aid is running.
Requirement:The cooking compartment must have
cooled down completely.
1.
Remove any accessories from the cooking compart-
ment.
2.
ATTENTION!
Distilled water in the cooking compartment leads to
corrosion.
▶ Do not use distilled water.
Mix 0.4litres water with a drop of washing-up liquid
and pour into the centre of the cooking compart-
ment floor.
3.
Press "Cleaning" in the menu.
4.
Press
"Cleaning aid".
The duration cannot be changed.
Loading ...
Loading ...
Loading ...