Loading ...
Loading ...
Loading ...
MAINTENANCE
EMPTYING THE BASE DUST BIN
The Base Dust Bin holds up to 60 days' worth of
dust and debris. Empty the base dust bin when the
debris level approaches the max fill line.
To detach the bin, press the Dust Bin Release
button on top right side of the base, then slide out
the bin.
To empty the bin, hold it over the trash, then press
the release button with the trash can icon on the
bottom of the bin. The bin lid will open, releasing
dust and debris. Lightly tap the dust bin against
the inside of the trash receptacle to knock o any
remaining debris. Reinstall the bin by sliding it into
the slot in the base until it clicks into place.
MAINTENANCE
MAINTAINING THE VAC & MOP 2-IN-1 DUST BIN
For the Vac & Mop 2-in-1 Dust Bin, press the release
button at the top of the dust bin and slide it out.
To turn the robot power o, take it o the Self-Empty Base and press the DOCK button on the robot for 5-7
seconds.
CAUTION: Turn o power before performing any maintenance.
To open the dust bin lid, pinch the side latches in the
finger slots and hold them while lifting the lid.
Remove the filter and use a damp cloth to wipe the
dust bin clean. Allow the bin to air-dry for 24 hours
before reinstalling it.
NOTE: Make sure to insert the dust bin completely, until
it clicks into place.
Look between the filter and the plastic shield and
make sure there is no debris buildup.
Loading ...
Loading ...
Loading ...