Loading ...
Loading ...
Loading ...
Menu Options
128
[É Playback Setup] menu ( mode only)
[Æ Recording Setup] menu
Menu item Setting options and additional information
[¸ Data Code] [j Off], [% Date]
[ Data Code]
[{ Data Code]
[j Off], [% Date], [& Time], [ Date and Time], [ Camera Data] (XF-AVC
clips) or [{ Camera Data] (photos)
Displays the date when an MP4 clip was recorded ([¸ Data Code]) or the date and/or time or
camera settings used when an XF-AVC clip ([ Data Code]) or a photo ([{ Data Code]) was
recorded.
Menu item Setting options and additional information
[Movie Format] [¸ MP4], [ XF-AVC] (A 46)
[¸ Resolution] [3840x2160 (150 Mbps)], [1920x1080 (35 Mbps)], [1920x1080 (17 Mbps)],
[1280x720 (8 Mbps)]
(A 46)
[ Resolution] [3840x2160 (160 Mbps)], [1920x1080 (45 Mbps)] (A 46)
[¸ Frame Rate] [¼ 59.94P], [» 29.97P], [º 23.98P] (A 46)
[ Frame Rate] [¼ 59.94P], [½ 59.94i], [» 29.97P], [º 23.98P] (A 46)
[¸ Audio Format] [ AAC 16bit 2CH], [ LPCM 16bit 4CH] (A 79)
[Recording Media] [v Rec Media for Movies]: [6 Mem. Card A], [7 Mem. Card B]
[{ Rec Media for Photos]: [6 Mem. Card A], [7 Mem. Card B]
(A 36)
[Dual/Relay Recording] [v Standard Recording], [4 Dual Recording], [ Relay Recording]
(or [ Relay Recording])
(A 36)
[Slow & Fast Motion] [j Off], [x0.4], [x0.5], [x0.8], [x2], [x4], [x10], [x20], [x60], [x120], [x600], [x1200] (A 48)
[Available Space in Memory],
[Used Space in Memory]
[6] (SD card A), [7] (SD card B)
Displays a screen where you can check the SD card's total space and speed class as well as the
following information:
mode only: Available space and estimates for remaining recording time (MP4 clips/XF-AVC
clips) and remaining number of photos. Estimates are based on current settings.
mode only: Amount of space in use.
[Initialize 8] [6 Mem. Card A], [7 Mem. Card B] (A 35)
[Rec Command] [i On], [j Off]
When this setting is set to [i On], you can use the camcorder’s REC button to control also the
recording operation of a compatible external recorder connected to the SDI OUT terminal (
u
only) or HDMI OUT terminal.
[HDMI Time Code] [i On], [j Off] (A 118)
When this setting is set to [i On], the HDMI signal output from the camcorder (only in
mode) includes the camcorder's time code.
[Time Code Mode] [ Preset], [ Regen.] (A 76)
[Time Code Running Mode] [ Rec Run], [ Free Run] (A 76)
[DF/NDF] [ DF], [ NDF] (A 77)
[Initial Time Code] Time code input screen (00:00:00.00 to 23:59:59.29) (A 76)
[User Bit Type] [ Setting], [ Time], [ Date];
[i] (user bit input): 8 hexadecimal characters (00 00 00 00)
(A 78)
[Camera Index] [A] to [Z] (A 42)
[Reel Number],
[Clip Number]
[001] to [999] (A 42)
[Clip Numbering] [m Reset], [n Continuous] (A 42)
Loading ...
Loading ...
Loading ...