Loading ...
Loading ...
Loading ...
REMOVABLEPARTS
REFLECTOR BOWLS
RECEPTACLE
TO REMOVE:
1. Be sure the controls are in the off position
and the elements are cool before attempt-
ing to remove them.
2. Grasp the element and rift slightly, just
enough to clear the drip bowl and pull it
straight out,,
, ,,,, i i, i L__JHI_JIJ_LL_JI'"I•
CAUTION: Do not lift the
element more than 1'" Lifting
the element mere than 1" can
damage the receptacle,
causing the element not to lie
fiat when it is plugged back in.
3. Lift out the drip bowl
TO CLEAN TH_ DRIP BOWL:
For brown food stains -- use dishwashing
detergent, warm water, plastic scouring pads,
mild abrasive cleaners, soap-filled scouring
pads or ammonia.
Clean drip bowls after each use. Rinse and
dry weft. Foods that are not removed can
cause permanent stains that cannot be
removed For heavily soiled bowls, place an
ammonia-soaked paper towel over the bowl
to loosen the soil, then gently scrub the bowl
with a plastic scouring pad
For blue.gold heat stains_-- use a metal
polish.
These stains are caused by overheating, and
are usually permanent, To,help minimize this
effect, avoid excessive use of high heat set-
tings and use flat bottom Pans that do not
extend more than 1" from the edge of the
cooking element.
To R PLACe T"
!, Place the drip bowl i_to th# opening and
make sure the receptacle is visible.
2, Slide the element firmly back into the
receptacle and lower it onto the drip bowl.
t 9 removable parts continued
Loading ...
Loading ...
Loading ...