Loading ...
Loading ...
Loading ...
Programmable functions
85
Maximum rinse level
The water level in the rinse cycle can
be permanently set to the highest
value.
This function is useful for allergy suffer-
ers as it achieves an excellent rinse res-
ult. Water consumption will increase.
Options
= Maximum rinse level is
switched off (factory default
setting)
= Maximum rinse level is
switched on
Suds cooling
When this is activated, additional wa-
ter flows into the drum at the end of
the main wash to cool the suds down.
Hot suds can damage plastic drainage
pipes.
Suds cooling takes place when a tem-
perature of 70°C or higher is selected
for the Cottons programme.
Suds cooling should be activated:
- to prevent the danger of scalding if
the drain hose is hooked over the
edge of a sink or basin.
- where drainage pipes do not comply
with DIN 1986.
Options
= Suds cooling is switched off
(factory default setting)
= Suds cooling is switched on
Anti-crease
The anti-crease function helps prevent
creasing if laundry is not going to be
removed immediately after the end of
the programme.
The drum continues to turn at intervals
for up to 30minutes at the end of the
programme. The door can be opened at
any time.
Options
= The anti-crease function is
switched off
= The anti-crease function is
switched on (factory default
setting)
Low water pressure
If the water pressure is below 100kPa
(1bar), the washing machine cancels
the programme and the fault mes-
sage appears.
If the water pressure cannot be in-
creased, activating this function will
prevent the programme from being can-
celled.
Options
= Low water pressure is
switched off
= Low water pressure is
switched on (factory default
setting)
Loading ...
Loading ...
Loading ...