Loading ...
Loading ...
Loading ...
SERVICE AND ADJUSTMENTS
CAUTION: BEFORE PERFORMING ANY SERVICEORADJUSTMENTS
• Depress brake-clutchpedal and set parking brake°
e Placeshift control lever in NEUTRAL position.
e Placeattachment clutch lever in DISENGAGEDposittom
e Turn Ignltlonkey OFF and remove key.
e Make sure the blades and all moving parts havecompletely stopped.
TRACTOR
TO REMOVE MOWER DECK
Remove mower deck from right side of tractor
e Place cutting height adjustment pedal in lowest cutting
position by moving memory rod to position 1 and pressing
pedal latch to release cutting height adjustment pedal_
• Turn front wheels all the way to the leftto allow mower deck
hitch to slide past dght front wheel
• Remove hairpin cotter from mower deck hitch and
remove deck hitchrod from top holes ofthe front mounting
bracket (see Fig 21)
e Lower deck hitch
e Remove hairpin cotter and Flatwasher from hanger pin of
right rear lift arm and slide off right mower deck lift bracket
(see Fig. 22)
• Remove hairpin cotter and Flatwasher from hanger pin of
left rear lift arm and slide off left mower deck lift bracket (see
Fig. 22)
e Pull lower engine pulley belt guides away from pulley (see
Fig. 23)
• Move mower deck forward arrd remove mower deck drive
belt from lower engine pulley Reposition belt guides
e Disconnect mower deck engagement cable from mower
clutch cable spring (see Fig_24).
e Placecutting height adjustment pedal in highest cutting
position
• Puit mower deck out from under right side of tractor.
TO INSTALL MOWER DECK
o
o
o
o
o
Place cutting height adjustment in highest position by
pressing cutting height adjustment pedal all the way down
until it latches If cutting height is not in highest position, the
deck brackets will hit the lift arms while sliding the deck
under the tractor
Place mower deck on right side of tractor with
chute deflector away from tractor
Turn front wheels of tractor to maximum leftturn
Lift deck hitch and slidedeck under tractor to a centered
position,
From left side of tractor, slide deck rearward Then connect
mower deck engagement cable to mower clutch cable
spring (see Fig 24). Be sure open side of spring end is
poieted down (see Fig 24 inset)
FRONT
MOUNTING
BRACKET
HAIRPIN
MOWER DECK
H_CH
VIEW FROM FRONT OFTRACTOR
FIG. 21
MOWER DECK HANGER
LIFT BRACKET PIN REAR LIFTARM
(RIGHTSIDE) (RIGHT SIDE)
FLATWASHER
HAIRPIN
COTTER
VIEW FROM RIGHTSIDE OFTRACTOR
FIG. 22
LOWER ENGINE
PULLEY BELT GUIDES
LOWER
ENGINE PULLEY
FIGo23
22
Loading ...
Loading ...
Loading ...