Loading ...
Loading ...
Loading ...
Transportation, storage and disposal en
57
19.1 Emergency release
Releasing the door
Requirement:The drain pump is
empty. →Page42
1. ATTENTION! Escaping water may
cause material damage.
▶ Do not open the door if you can
see water through the glass.
Pull the emergency release down-
wards with a tool and release.
a The door lock is released.
2. Insert the maintenance flap and
lock it into place.
3. Close the maintenance flap.
20 Transportation, stor-
age and disposal
20.1 Removing the appliance
Note:You can find further information
in the digital instruction manual by
scanning the QR code in the table of
contents or on www.bosch-
home.com.
1. Turn off the tap.
2. Empty the water inlet hose.
3. Switch off the appliance.
4. Unplug the appliance's mains plug.
5. Drain the water.
→"Cleaning the drain pump",
Page42
6. Detach the hoses.
7. Empty the dispensers.
20.2 Inserting the transit
bolts
Secure the appliance for transporta-
tion using transit bolts in order to pre-
vent damage.
1. Use a screwdriver to remove the 4
cover caps.
Keep the cover caps.
2. Install the 4 transit bolts. Refer to
the description
→"Removing the transit bolts",
Page13 for this and proceed in re-
verse order.
20.3 Using the appliance
again
▶ For further information, see
→"Installation and connection",
Page12 and
→"Starting an empty washing
cycle", Page19.
Loading ...
Loading ...
Loading ...