Loading ...
Loading ...
Loading ...
32 - USE 91477A872/A
Correct positioning of the flame-spreader
crowns and burner caps
Before lighting the hob burners, make sure that
the flame-spreader crowns are correctly
positioned in their housings with their respective
burner caps. Make sure that the holes in the
burners are aligned with the igniters and
thermocouples. Also ensure that the flame-
spreader crowns are correctly engaged in the
burner holes.
Correct positioning of the grids
To install the grids follow the instructions as
shown in the following pictures:
1. Lay the lateral grids on the hob paying
attention to position the front teeth facing the
knobs.
2. Lay the centre grid engaging the notches in
the teeth of the lateral grids.
Pay attention, moreover, to the wording
"FRONT" below each grid at the
front, as a further indication
on how to position the grids properly on the
hob.
Position the grids so that the
"FRONT" wordings face towards the
hob knobs.
Precautions when using the griddle
A few precautions are necessary if you wish to
use a griddle:
• The griddle must not extend beyond the
edge of the hob.
• Do not place the griddle over more than
one burner at the same time.
• The griddle can be pre-heated on the
burner at maximum power for no more than
10 minutes.
• Make sure that the burner flame does not
extend beyond the edge of the griddle.
Loading ...
Loading ...
Loading ...