Loading ...
Loading ...
Loading ...
INSTALLATION - 3591477A872/A
e
a window or to increase the speed of any fans.
Extraction of the combustion products
The combustion products may be extracted by
means of hoods connected to a natural draught
chimney whose efficiency is certain or via forced
extraction. An efficient extraction system requires
precision planning by a specialist qualified in
this area and must comply with the positions and
clearances indicated by the applicable
standards.
When the job is complete, the installer must
issue a certificate of conformity.
Adaptation to different types of gas
If other types of gas are to be used, the nozzles
must be replaced and the primary air must be
adjusted. The top of the hob has to be removed
in order to replace the nozzles and adjust the
burners.
Removing the hob top
1. Remove the grids from the hob top.
2. Remove the flame-spreader crowns and
relative burner caps.
3. Remove the knobs lifting them from their
housing.
Only for models with lateral UR:
4. Lift the appliance from its housing and turn it
upside down.
1 Extraction using a hood
2 Extraction without a hood
A Extraction with a single natural draught
chimney
B Extraction with a single chimney with
extractor fan
C Extraction directly outdoors with wall- or
window-mounted extractor fan
D Extraction directly outdoors through wall
Air
Combustion products
Extractor fan
1A1A
1B1B
2C2C
2D2D
In order to be able to replace the
nozzles, the appliance must be
removed from the built-in unit.
Loading ...
Loading ...
Loading ...