Loading ...
Loading ...
Loading ...
57
Disk
Select the event type, and select Enable to enable the handling of corresponding abnormal
events.
Configure more settings. See Table 5-3.
Table 5-3 Abnormality setting parameters
Parameter Description
Event type
You can configure corresponding abnormal events on the following three tabs.
HDD: To set the ways to handle abnormal HDD events, including No HDD,
HDD Errors, HDD No Space.
User: Set the ways to handle illegal login events.
Device: Set the ways to handle abnormal device events, including
Temperature Too High, Low Battery Safety Exception, Network Security
Exception, Over Speed, Low Speed, Collision, Turnover, Rapid Turn, Rapid
Speedup, Sharp Brake and ACC Power Off.
The event type might be different depending on the model you purchased, and
the actual interface shall prevail.
Lower Than
Select Disk tab, and if the Event Type is Low Space, configure this parameter.
You can set the percentage of Disk remaining space. When Disk remaining space
is lower than this percentage, an alarm will occur.
Login
Attempt
Select User tab, and if the Event Type is Illegal Login, configure this parameter.
The maximum number of allowed password input errors during user login. If the
number of password input errors reaches this value, the user account will be
locked.
Lock time
Select User tab, and if the Event Type is Illegal Login, configure this parameter.
Set the time for locking the user account when the number of password input
errors reaches the set value.
High
Temperature
Select Device tab, and if the Event Type is High Temperature, configure this
parameter.
Enter the upper limit of device temperature. The alarm is triggered when the
device temperature exceeds this value.
Lower Than
Select Device tab, and if Event Type is Battery Low Voltage, configure this
Loading ...
Loading ...
Loading ...