Broan HRV110 USER AND INSTALLER MANUAL

Loading ...

5. USING THIS UNIT

Once your installation is completed, enjoy a better indoor air quality. This balanced ventilation unit is designed to bring

fresh ﬁ ltered air inside while eliminating stale air and airborne pollutants. Venmar fresh air systems care about your health

by improving your indoor air quality and home comfort.

The unit is also energy efﬁ cient. It recovers heat or energy depending on the model to improve comfort and energy

efﬁ ciency during the heating and cooling periods.

5.1 YOUR VENTILATION SYSTEM

5.2 CONTROLS

All units are equipped with an integrated control, located in front of the electrical compartment. A wall control is also

included with the unit and must be installed for unit operation. An optional auxiliary wall control for the bathroom can be

installed.

UNIT OPERATION

Use your Automatic main wall control to select the appropriate mode to suit your needs and desired comfort.

Select:

- AUTOMATIC mode to let the system adjust the ventilation mode in an autonomous way by evaluating outdoor

temperature;

- MIN, MED or MAX speed for a continuous fresh air intake;

- INTERMITTENT mode for 20 minutes in MIN speed continuous fresh air intake and 40 minutes in STANDBY or RECIRCU-

LATION;

- RECIRCULATION mode to recirculate the air inside without any fresh air coming in from outside.

- TURBO mode for a 4-hour countdown timer at MAX speed exchange ventilation for high activity event.

1. See section 3.4 for the main wall control operation.

2. See section 4 for integrated control operation.

3. See corresponding installation and user guide on www.venmar.ca for the auxiliary wall control operation.

NOTE: If an optional auxiliary wall control is used, it overrides the main wall control.

6. SERVICE PARTS

DESCRIPTION PART NUMBER

MERV8 ﬁ lters kit SV66133 1 1

Optional HEPA membrane ﬁ lter V25000 1 1

HRV110

ERV130

All parts listed in the following table are available where you bought your unit or in an authorized service center.

NOTE: Please note that parts not listed are not available; those parts require assembly knowledge that only manufacturer

can guarantee.

REPLACEMENT PARTS AND REPAIRS

In order to ensure your ventilation unit remains in good working condition, you must use the

manufacturer’s genuine replacement parts only. The manufacturer’s genuine replacement parts are

specially designed for each unit and are manufactured to comply with all the applicable certiﬁ cation

standards and maintain a high standard of safety. Any third party replacement part used may cause

serious damage and drastically reduce the performance level of your unit, which will result in premature

failing. The manufacturer recommends to contact a certiﬁ ed service depot for all replacement parts and

repairs.

Loading ...

Broan HRV110 Venmar by , Heat Recovery Ventilator, 112 CFM