Loading ...
Loading ...
Loading ...
● Swapping Your World Time and Home
Time
1.
Y
Tap the “G-SHOCK Connected” icon.
2.
X
Hold down the (C) button for about 2
seconds.
●
The second hand will move to “R”. Keep
(C) depressed until the second hand
starts moving again and then stops at
“R”.
●
The second hand will move from “R” to
“C” when a connection is established
between the watch and phone.
3.
Y
Perform the operation shown on the
phone screen to swap your Home Time
with your World Time.
30
30
After swappingBefore swapping
World Time
World TimeHome Time
Home Time
Note
●
Auto time adjustment is not performed
for 24 hours after swapping of the
Home Time and World Time.
Configuring Timer Settings
1.
Y
On the Home Screen, tap the “G-
SHOCK Connected” icon.
2.
X
Hold down the (C) button for about 2
seconds.
●
The second hand will move to “R”. Keep
(C) depressed until the second hand
starts moving again and then stops at
“R”.
●
The second hand will move from “R” to
“C” when a connection is established
between the watch and phone.
3.
Y
Perform the operation shown on the
phone screen to configure the timer time
setting.
Setting the Alarm
1.
Y
On the Home Screen, tap the “G-
SHOCK Connected” icon.
2.
X
Hold down the (C) button for about 2
seconds.
●
The second hand will move to “R”. Keep
(C) depressed until the second hand
starts moving again and then stops at
“R”.
●
The second hand will move from “R” to
“C” when a connection is established
between the watch and phone.
3.
Y
Perform the operation shown on the
phone screen to configure alarm time
settings.
Adjusting Hand and Day
Indicator Alignment
If the hands and/or date indicator are out of
alignment even though auto time adjustment
is being performed, use G-SHOCK
Connected to adjust them.
1.
Y
On the Home Screen, tap the “G-
SHOCK Connected” icon.
2.
X
Hold down the (C) button for about 2
seconds.
●
The second hand will move to “R”. Keep
(C) depressed until the second hand
starts moving again and then stops at
“R”.
●
The second hand will move from “R” to
“C” when a connection is established
between the watch and phone.
3.
Y
Perform the operation shown on the
phone screen to correct hand and day
indicator alignment.
Phone Finder
You can use phone finder to trigger a tone on
the phone to make it easy to find. The tone is
forced to sound even if the phone is in vibrate
mode.
Important!
●
Do not use this function in areas where
phone call tones are restricted.
●
The tone sounds at a high volume. Do
not use this function when listening to
phone output over earphones.
1.
X
If the watch is connected with a phone,
press any button to terminate the
connection.
30
30
After disconnectionConnected
Operation Guide 5513
8
Loading ...
Loading ...
Loading ...