Loading ...
Loading ...
Loading ...
Configuring Dual Time
Settings
Dual Time lets you keep track of the current
time in another time zone in addition your
current location time.
30
Dual Time
Dual Time 24-hour
1. Pull out the crown to the first click.
This causes the second hand to move to
12 o’clock.
2. Rotate the crown to change the Dual Time
setting.
●
You can set the Dual Time in 15-minute
increments.
Crown
Dual Time 24-hour hand
Dual Time minute hand
Dual Time hour hand
3. Push the crown back in.
Swapping Your Current
Location Time and Dual Time
Settings
You can swap the time in your current location
with the Dual Time by holding down (B) for
about three seconds.
●
Pressing (B) will cause illumination to turn
on. Keep the button depressed for three
seconds.
30
30
After swappingBefore swapping
Dual Time
Dual Time
Current location time
Current location time
Note
●
If you are using the small hour and
minute hands for Dual Time, only the
time in your current location will be
swapped with Dual Time. Dates are
not swapped.
Stopwatch
The stopwatch can measure elapsed time up
to 23 hours, 59 minutes, 59 seconds.
Note
●
If an ongoing elapsed time
measurement operation continues for
24 hours, the measurement will stop
and the stopwatch will reset to all zeros
automatically.
Getting ready
Perform this procedure in the Stopwatch
Mode.
l
Navigating Between Modes
30
Stopwatch Mode
Measuring
30
24-hour
Minutes
Hours
Seconds
1. Use the operations below to measure
elapsed time.
B
B
B
B
Stop
Resume
Stop
Start
2. Press (D) to reset the elapsed time to all
zeroes.
3. Press (A) three times to return to the
Calendar Mode.
Measuring a Split Time
30
24-hour
Minutes
Hours
Seconds
1. Use the operations below to measure
elapsed time.
●
Each press of (D) causes the elapsed
time up to that point (split time) to be
indicated for 5 seconds.
B
D
B
Stop
Split
Start
2. Press (D) to reset the elapsed time to all
zeroes.
3. Press (A) three times to return to the
Calendar Mode.
Operation Guide 5513
12
Loading ...
Loading ...
Loading ...