Loading ...
Loading ...
Loading ...
After Purchasing Another Phone
You need to perform the pairing operation
whenever you want to establish a Bluetooth
connection with a phone for the first time.
1. Move the phone to be paired with close to
(within one meter of) the watch.
2.
Y
On the Home Screen, tap the “G-
SHOCK Connected” icon.
3.
Y
Perform the operation shown on the
screen of the phone to be paired with.
●
If a pairing prompt message appears,
perform the operation shown on the
phone screen.
●
When pairing starts, the second hand
will point to “R”. When pairing is
complete, the second hand will move to
“C”.
C mark
Note
●
If your previous phone is near the
watch while you are trying to pair with
a new phone, the watch will pair with
the previous phone, which makes it
impossible to pair with the new phone.
If this happens, delete the previous
pairing information from the watch.
Also, unregister the watch from the G-
SHOCK Connected app of the phone
you will no longer connect with.
l
Unpairing
Watch Settings
Use the procedure below to configure current
location time and Dual Time settings
manually.
Getting ready
Perform this procedure in the Calendar Mode.
l
Navigating Between Modes
30
Setting the Time/Date
While the watch is connected to a phone, it will
automatically adjust its day and time settings
to those of the phone. If the watch is not
connected to a phone, use the procedure
below to adjust its day and time settings.
1. Pull out the crown to the second click.
This causes the second hand to move to
“A” of the watch’s current time setting is
a.m., or “P” if it is p.m., and enables the
hour and minute setting operation.
30
Crown
Minutes
Hours
2. Rotate the crown to adjust the hour and
minute settings.
●
The Dual Time setting also changes in
accordance with the current time
setting. Crown operation is disabled
while the Dual Time hour and minute
hands are moving.
3. Press (A).
This enables the month and day setting
operation.
4. Press (B) to change the month.
DayMonth
12
6
1
11
5
7
2
10
48
39
5. Rotate the crown to change the day.
6. Press (A).
This enables the year 10’s digit setting
operation.
7. Rotate the crown to change the year 10’s
digit.
30
00
60
10
5070
20
4080
90
Year (10’s digit)
8. Press (A).
This enables the year one’s digit setting
operation.
9. Rotate the crown to change the year one’s
digit.
3
0
6
1
57
2
48
9
Year (one’s digit)
10. On a time signal at the top of a minute,
push the crown back in.
Note
●
The day of the week is set
automatically in accordance with the
year, month, and day settings.
Operation Guide 5513
11
Loading ...
Loading ...
Loading ...