Loading ...
Loading ...
Loading ...
en Basic settings
20
QBasic settings
Ba s i c s et t i ngs
There are various settings available to you in order to
help use your appliance effectively and simply. You can
change these settings as required.
List of basic settings
Depending on the features of your appliance, not all
basic settings will be available.
--------
Note: If your appliance is equipped with the Home
Connect function, you will find the Home Connect
settings at the end of the basic settings for your
appliance. ~ Page 21
The Home Connect settings begin with •’.
Changing the basic settings
The function selector must be set to the "Off" position.
1. Press and hold the v button for approximately
4 seconds.
The first basic setting will appear on the display,
e.g. ™‹‚ ‚.
2. Turn the temperature selector to change the setting
as required.
3. Use the @ button to navigate to the next basic
setting.
4. Using the A or @ button, continue going through all
the basic settings as described above, changing the
settings if necessary using the temperature selector.
5. When you have finished, press and hold the
v button again for approximately 4 seconds to
confirm the settings.
All basic settings have now been applied.
You can change the basic settings again at any time.
Note: Your changes to the basic settings will be
retained even after a power failure.
FSabbath mode
Sa b b a t h mode
Sabbath mode lets you set a cooking time of over 70
hours. This enables you to keep dishes in the cooking
compartment warm without having to switch the
appliance on or off.
Starting Sabbath mode
Before you can use Sabbath mode, you will need to
activate it in the basic settings. ~ "Basic settings"
on page 20
The appliance heats up with top/bottom heating. You
can set a temperature between 85 °C and 140 °C. The
cooking time can be adjusted to the nearest half hour
between 24 and 72 hours.
1. Set the function selector to the % programme.
†‘›› appears on the display.
2. Use the temperature selector to set the temperature.
3. Touch the v button twice.
The cooking time y will be highlighted on the
display.
4. Use the @ or A button to set the cooking time.
Note: The end time cannot be delayed.
The appliance will start heating after a few seconds. The
remaining time will count down on the display.
When the cooking time for Sabbath mode has ended,
an audible signal will sound. The appliance will stop
heating. The time on the display will be zero.
Switch the appliance off by turning the function selector
to the "Off" position.
Basic setting Options
™‹‚ Audible signal duration upon
completion of a cooking time
or timer duration
‚ = approx. 10 seconds
ƒ = approx. 30 seconds*
„ = approx. 2 minutes
™‹ƒ Amount of time until a setting
is applied
‚ = approx. 3 seconds*
ƒ = approx. 6 seconds
„ = approx. 10 seconds
™‹„ Button tone that sounds when
a button is touched
‹ = off
‚ = on*
™‹… Brightness of the display illu-
mination
‚ = dark
ƒ = medium*
„ = bright
™‹† Display time of day ‹ = hide the time
‚ = display the time*
™‹‡ Enable childproof lock activa-
tion?
‹ = no
‚ = yes*
ƒ = yes, with locked door**
™‹ˆ Interior lighting on when
appliance in operation?
‹ = no
‚ = yes*
™‹‰ Cooling fan run-on time ‚ = short
ƒ = medium*
„ = long
… = extra long
™‹Š Telescopic rails retrofitted?** ‹ = no* (for rails and single
pull-out system)
‚ = yes (for double and triple
pull-out systems)
™‚‹ Sabbath mode available? ‹ = no*
‚ = yes
™‚‚ Water hardness** ‹ = softened
‚ = soft (up to 1.3 mmol/l)
ƒ = medium (1.3 - 2.5 mmol/
l)
„ = hard (2.5 - 3.8 mmol/l)
… = very hard* (above
3.8 mmol/l)
™‚ƒ Reset all values to factory set-
tings?
‹ = no*
‚ = yes
* Factory setting (factory settings may vary depending on the appli-
ance model)
** Not available for all appliance types.
Loading ...
Loading ...
Loading ...