Loading ...
Loading ...
Loading ...
5.
Use the directional buttons to go to the Accessibility menu, and then press the Select button to open this
menu.
6.
The menu will appear with Voice Guide Settings as the rst selection. Highlight Voice Guide Settings, and then
press the Select button.
7.
A menu appears with the options to change Voice Guide, Volume, Speed, Pitch, and MICRO LED Background
Volume.
8.
Select the menu using the directional buttons, and then press the Select button.
The menus are activated when Voice Guide is on.
Running the Accessibility menu functions using Bixby
This function is available only if Voice Assistant is set to Bixby. ( Settings General Voice Voice Assistant)
Bixby may not be supported depending on the model or geographical area.
To use Bixby, the MICRO LED must be set up and tuned and must be connected to the Internet. You can connect the
MICRO LED to the Internet during the initial setup or do it later through the settings menu.
There are many commands you can say to control the MICRO LED. These can be used together with Voice Guide
to give you voice input and voice output. You can use the Samsung Smart Remote but the MICRO LED must be
connected to the Internet.
To speak a command, press and hold the button (located near the top of the Samsung Smart Remote, directly
below the small LED (microphone) and above the directional button) and say the command, and then release the
button. The MICRO LED will conrm the command.
For example you can:
• Turn Voice Guide on
Press the button on the Samsung Smart Remote, and then say "Voice Guide on."
• Turn High Contrast on
Press the
button on the Samsung Smart Remote, and then say "High Contrast on."
- 148 -
Loading ...
Loading ...
Loading ...