Loading ...
Loading ...
Loading ...
The problem Try this!
The message "Connecting
to Anynet+ device..." or
"Disconnecting from Anynet+
device" appears on the screen.
You cannot use the remote control when the MICRO LED is conguring Anynet+ or
switching to the MICRO LED main screen.
Use the remote control after the MICRO LED has completed the Anynet+
conguration or has switched to the MICRO LED main screen.
The Anynet+ device won't play. You cannot use the play function when Reset is in progress.
The connected device is not
displayed.
Check whether the device supports Anynet+.
Anynet+ devices must be connected to the MICRO LED using an HDMI cable. Make
sure the device is connected to your MICRO LED with an HDMI cable. Some HDMI
cables may not support Anynet+.
Check whether the HDMI cable is properly connected.
Go to Anynet+ (HDMI-CEC) and see if Anynet+ (HDMI-CEC) has been set to On.
• Settings General External Device Manager Anynet+ (HDMI-CEC)
Scan for Anynet+ devices again.
If the connection is terminated because there has been a power failure or the HDMI
cable has been disconnected, please scan for the device again.
- 136 -
Loading ...
Loading ...
Loading ...