Loading ...
Loading ...
Loading ...
- 4 -
CONNECTION WITH PC
1. Requirement of computer configuration :
CPU : Pentium 600MHZ Or above ;
One free available USB Connecting Interface;
The lowest screen resolution of monitor is 800*600 (or
much higher ),color mode;
At least 8MB available memory;
At least 50MB available disk memory;
Operation system: MICROSOFTWINDOWS 98/ME/2000/XP HOME/XP
PROFESSIONAL 32BIT.With VBA project digital certificates
2. Install the software from the disc:
Place the attached Disc in your disc driver open the disc driver plate
symbol , double click the “setup .exe” program logo , Enter Program
installation window, click “NEXT” Enter next interface ,as show in
figure16
figure16
Please examination and accept or not to accept this agreement on.
click “NEXT” Enter next interface, as show in figure17
figure17
Input user information, click “NEXT” Enter next interface, as show in
figure18
Figure18
Choose the target directory ,then press “next” as show in figure19
Figure19
Choose whether to create a shortcut, as show in figure20
Figure20
This program will confirm whether installed to computer, then press
“Install”, as show in figure21
Figure21
Click “Finish” to complete the software installation, and the program
will be automatically generated on the tabletop of the PC. as show in
figure22
Figure22
3. Software Introduction
Double click the software quick way on the tabletop ( start by menu, the
route is Start / H856A / 856PC) ,as show in figure23
Figure23
Note:
A. If you want to delete this software, pleas open “Controlling Panel” then
double check “add/delete program” choose “HG856Arealtime” on
the list then click the “delete” button. According to the prompt of the
system operation.
B. You can check if Anemometer is connected well with the computer on
the state column:
The Anemometer icon is dynamic: Connection in good state
The Anemometer icon is still: Failed in connection
Menu Introduction
Order
Order function
Real Time Measure
Real time data measurement, the measured data
will real time be shown on the computer.
Open
Open measurement data file that is saved as the
LAB format
Save
Save real time measurement data
Exit
Quit the program
Tool bar introduction as shown in following figure:
Button
Function
Real time data measurement, the measured data will real time be
shown on the computer.
Import data stored in the anemometer to computer
Open measurement data file that is saved as the LAB format
Save real time measurement data
data displayed again.
Help
System information
Close the software
Loading ...