QUICKSTART
5.965-281.0 05/14
Care dispersion RM 784
Care treatment
몇 WARNING
These are only brief instructions! Please read the product information and observe the safety information
on the product label prior to using the detergent. Follow the dosing instructions on the product label.
The non-compliance with the safety information can cause damage to the object to be cleaned and risks
for the environment, the user and other persons.
Preparation
1
ABCA Deep clean the floor covering, check the
pH-value. Nominal value: 7 - 8.5.
B Mask surfaces that are not to be treated.
Hold work materials available.
C Carefully tilt the container prior to use, do not
shake.
Coating
2
A B C A Apply the undiluted product (approx. 20-
40 ml/m², depending on the floor covering) to
the floor. Work in sections of max. 10 m².
B Spread the care dispersion swiftly in thin lay-
ers and overlapping paths towards the door.
C Allow the care film applied to dry completely,
do not step on the surface (approx. 30 min-
utes, depending on the indoor climate).
D After it has dried completely, apply a second
layer. Depending on the floor covering
(approx. 15-25 ml/m²).
Curing
3
AB A If necessary, set up a drying fan. Drying time
without drying fan at least 3 hours.
B Ready to walk on after 3 hours.
Resilient after approx. 24 hours.
Completely cured after approx. 2 weeks.
Note
The drying times depend on the indoor climate.
QUICKSTART
5.965-281.0 05/14
Care dispersion RM 784
Spray-cleaner procedure
몇 WARNING
These are only brief instructions! Please read the product information and observe the safety information
on the product label prior to using the detergent. Follow the dosing instructions on the product label.
The non-compliance with the safety information can cause damage to the object to be cleaned and risks
for the environment, the user and other persons.
Preparation
1
ABCA Hold work materials available. The floor must
be free from soiling, check pH-value nominal
value: 7 - 8.5.
B Carefully tilt the container prior to use, do not
shake.
C Dilute the care dispersion depending on the
desired intensity of the refurbishment
(approx. 20-30%). Prepare polishing machine
(white pad).
Applying the care agent
2
A B A Screw the top on the spray bottle and inflate it.
B Spray the care agent evenly thinly onto the
surface to be refurbished.
Polishing
3
A A Polish the floor covering immediately
after spraying on the agent until an even
surface to the existing care film is created.
Clean accessories immediately after use.
QUICKSTART
5.965-281.0 05/14
Polishing (optional)
4
A A If desired, polish the floor covering after curing.
Clean accessories immediately after use.
QUICKSTART
5.965-281.0 05/14
Care dispersion RM 784
Wiping refurbishment
몇 WARNING
These are only brief instructions! Please read the product information and observe the safety information
on the product label prior to using the detergent. Follow the dosing instructions on the product label.
The non-compliance with the safety information can cause damage to the object to be cleaned and risks
for the environment, the user and other persons.
Preparation
1
ABCA Hold work materials available. The floor must
be free from soiling, check pH-value nominal
value: 7 - 8.5.
B Carefully tilt the container prior to use, do not
shake.
C Dilute the care dispersion depending on the
desired intensity of the refurbishment
(approx. 30-50%).
Maintaining the coating
2
A B C A Apply the care agent solution onto the sur-
face to be refurbished. If necessary, sand
back the neighbouring coating. Apply the
care agent solution onto the surface to be
refurbished.
B Spread the care agent solution swiftly in thin
layers and overlapping paths over the exist-
ing care film, too.
C Allow the care film applied to dry completely,
do not step on the surface (approx. 20 min-
utes, depending on the indoor climate). If
necessary, apply another layer.
Curing
3
AB A If necessary, set up a drying fan. Drying time
without drying fan at least 3 hours.
B Ready to walk on after approx. 3 hours.
Resilient after approx. 24 hours.
Completely cured after approx. 2 weeks.
Note
The drying times depend on the indoor climate.
QUICKSTART
5.965-281.0 05/14
Polishing (optional)
4
A A If desired, polish the coated floor covering af-
ter curing in order to conform the new care
film to the existing care film.
Clean accessories immediately after use.
QUICKSTART
5.965-281.0 05/14
Care dispersion RM 784
Wiping care for revitalisation
몇 WARNING
These are only brief instructions! Please read the product information and observe the safety
information on the product label prior to using the detergent. Follow the dosing instructions on the product label.
The non-compliance with the safety information can cause damage to the object to be cleaned and risks for the
environment, the user and other persons.
Preparation
1
ABCA Hold work materials available. Floor covering
must me free from soiling.
B Carefully tilt the container prior to use, do not
shake.
C Dilute the care dispersion depending on the
desired revitalisation of the care film
(1% - 3%).
Maintaining the coating
2
A B C A Dip in the mop.
B Wring out the mop.
C Clean and maintain the floor covering.
Note
Care dispersion is building up layers.
Drying
3
A A Allow the surface to dry. Do not step on the
drying surface.
Clean accessories immediately after use.
