Loading ...
Loading ...
Loading ...
25
PROBLEM POSSIBLE CAUSE REMEDY
At the end of descaling, the appliance
requests a third rinse
During the two rinse cycles, the water
tank (A17) has not been lled to the
MAX level
Follow the instructions displayed by the appli-
ance, but rst empty the drip tray (A15) to avoid
the water overowing.
Milk does not ow from the milk
spout (E5)
The milk container (E) lid (E2) is dirty Clean the milk container lid as described in sec-
tion "13.10 Cleaning the milk container".
The milk contains large bubbles and
squirts out of the milk spout (E5) or
there is little froth
The milk is not cold enough or is not
semi-skimmed or skimmed.
Use skimmed or semi-skimmed milk at refrig-
erator temperature (about 5° C). If the result is
not as expected, try a dierent brand of milk.
The froth adjustment dial (E1) is incor-
rectly adjusted.
Adjust following the instructions in section "8.
making cappuccinos and milk-based
coees".
The milk container lid (E2) or froth ad-
justment dial (E1) are dirty
Clean the milk container lid and dial as de-
scribed in section "13.10 Cleaning the milk
container".
The hot water connection nozzle (A8)
is dirty
Clean the connection nozzle as described in
section "13.11 Cleaning the hot water nozzle".
The machine emits noises or small
pus of steam while not in use
The machine is ready for use, or has re-
cently been turned o, and condensate
is dripping into the hot vaporiser
This is part of normal operation. To limit the
phenomenon, empty the drip tray.