Loading ...
Loading ...
Loading ...
20
DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY
ADD GROUND COFFEE MAX.
ONE MEASURE
A LONG coee with pre-ground coee has been
requested
Place pre-ground coee in the funnel (A4) (g.
12) and press the selector corresponding to
"OK" to continue and complete delivery.
FILL BEANS CONTAINER
The coee beans have run out. Fill the beans container
(A4) (g. 10)
.
The pre-ground coee funnel
(A4)
is clogged. Empty the funnel with the help of the brush
(D5) as described in section "13.8 Cleaning the
pre-ground coee funnel".
GROUND TOO FINE. ADJUST
MILL
The grinding is too ne and the coee is deliv-
ered too slowly or not at all.
Repeat coee delivery and turn the grinding
adjustment dial
(A5) (g. 13)
one click clock-
wise towards "7" while the coee mill is in
operation. If after making at least 2 coees
delivery is still too slow, repeat the correction
procedure, turning the grinding adjustment
dial another click until delivery is correct (see
section "7.5 Adjusting the coee mill"
)
. If the
problem persists, make sure the water tank
(A17) is fully inserted.
If the water softener lter (D7) is present, an
air bubble may have been released inside the
circuit, obstructing delivery.
Insert the hot water spout (D6) in the appli-
ance and deliver a little water until the ow
becomes regular.
SELECT A MILDER TASTE OR
REDUCE COFFEE AMOUNT
Too much coee has been used. Select a milder taste by pressing the "AROMA"
button (C5) or reduce the quantity of ground
coee (maximum 1 measure).
Loading ...
Loading ...
Loading ...