Loading ...
Loading ...
Loading ...
8
• Accurate maintenance guarantees good
functioning and long-lasting performance.
• Particular care is due to the grease filter panel. It
can be removed by pushing its handle toward the
back side of the rangehood and pulling the filter
downwards so to unfasten it from its slot (Fig.2).
To insert the filter just perform the opposite
operation.
• After 30 hours of operation, the buttons on the
control panel will flash, signaling the filters are due
for cleaning. Press the timer button to reset.
The grease filter needs cleaning by regular
handwashing or in dishwashers every two
months at least, depending on its use.
• Filters may require cleaning sooner if
frequent heavy frying is done.
• To clean the appliance itself, water and detergent
are recommended, while abrasive products
should be avoided. For steel appliances
specialized detergents are recommended (please
follow the instructions indicated on the product
itself to obtain the desired results).
MAINTENANCE
Manual control buttons:
SL22 900, SL7 1200, SL107 S900, SL107 S1200
A: Light switch on/off
B: Motor switch on speed 1/off - (low/simmer)
C: Motor switch on speed 2 - (general cooking)
D: Motor switch on speed 3 - (high power)
E: Motor switch on speed 4 - (booster)
F: 10 minute shut-off timer
Electronic touch control
SLTC 97 900, SLTC 107 G900
A: Light switch on/off
B: Motor speed decrease / motor off
C: Motor speed indicator
D: Motor speed increase
E: 10 minute shut-off timer
USING THE RANGEHOOD
A B C D E
A B C D E
Loading ...
Loading ...
Loading ...