Roidmi EVE CC robot vacuum and mop cleaner with cleaning base

2. Do not use detergents, disinfectants, solid detergents, and other cleaning products to prevent corrosion and blocking of the two-in-one water tank;

3. Due to production testing reasons, there may be a small amount of water residue in the two-in-one water tank, which is a normal phenomenon;

4. When mopping the floor, set up virtual walls or a no-go area in carpeted areas; do not use the mopping function on the carpet;

5. When the device is charging or not in use, remove the mopping module, pour out the excess water in the water tank, and clean the mop to avoid mildew or odours;

6. It is recommended to clean the mop after each use to ensure the water output speed and cleaning effect. If necessary, the mop can be replaced with a new one;

7. When the main unit is charging on a wooden floor, timely remove the mopping module to prevent the mop from leaking and damaging the floor.

Installation of mopping module

Step 1: Install the mop

Insert the wrung damp mop into the mop holder and paste it on the Velcro;

Step 2: Fill the two-in-one water tank with water

Open the rubber cap of the two-in-one water tank inlet, pour clean water into the tank, then

fasten the rubber cap;