Loading ...
Loading ...
Loading ...
1. Do not use this device outdoors, on non-flat surfaces, or in commercial or industrial environments;
2. Do not use the product in environments without protective fencing (such as duplex floors, open balconies, furniture tops);
3. Do not use it in environments above 35℃, below 0℃, or where there is any liquid or sticky substance on the floor;
4. Do not block the air outlet to avoid deformation, malfunction, or fire caused by overheating;
5. Do not drag the device to avoid scratching the floor;
6. Do not swing the device or allow young children to play with it to avoid injury or damage to the device;
7. Do not drop the device or collide it with other objects, or apply pressure to it to avoid fire or electric shocks caused by malfunctions;
8. Make sure to install the rolling brush and filter before using the device to avoid damage to the motor and device;
9. Check whether the power cord is intact before charging;
10. Before using the robot vacuum and mop cleaner for the first time or replacing the designated filter, turn off the main power and ensure the filter is properly installed;
11. Used battery packs should be properly disposed off. Do not discard them randomly;
12. Before using the product, arrange the desks, chairs, household items, floor objects, etc. neatly, and clear power cords and small items laying on the ground to avoid
the product being blocked during cleaning;
13. When the machine is running, keep curtains and tablecloths away from the ground, and keep the carpet flat, so as to prevent the product from being blocked
during operation and causing damage to your valuables;
14. Before the first use, make sure all room doors are open for the device to build a complete home map;
Product overview
Main unit
Power button
• Press and hold the button to power on/off the device
• Press the button to start/pause cleaning
Power button + Recharge button
• Press and hold the two buttons simultaneously for 3
seconds to reset Wi-Fi and enter network settings
Laser distance sensor
Collision sensor (×2)
Indicator
Infrared lens
Infrared obstacle avoidance sensor
Mop holder
Two-in-one water tank
Charging electrode plate (×2)
Dust collection inlet
Cliff sensor (×3)
Omni wheel
Recharge button
• Press the button to pause during operation
• Press the button to return to recharge during pause
• Press and hold the button for 5 seconds until you hear a
prompt, then press and hold for another 5 seconds for a
factory reset
Battery
Side brush
Wheel (×2)
Rolling brush
Rolling brush cover
Mop
15. Do not stand in front of the device while it is operating to avoid obstructing the device from identifying the area to be cleaned;
16. If not used for a long time, the robot vacuum and mop cleaner should be fully charged before it is turned off. It is recommended to charge the device at least once
every 3 months to avoid the battery damage;
17. Do not use or keep the device under extreme adverse conditions, such as extreme temperatures. It is recommended to use it in an indoor ambient environment
and keep it in a cool and dry place.
4
EN
Loading ...
Loading ...
Loading ...