Loading ...
Loading ...
Loading ...
6
Before your first official use we recommend running your Kettle as follows:
• Fill the Kettle to the maximum level mark on the appliance with fresh tap water and bring
to boil. Empty the water from the Kettle. Once cooled rinse Kettle with water.
• Repeat process at least 2 times to ensure your Kettle is clean.
Using Your Kettle:
1. Unravel power cord from under base and connect to a power outlet.
2. Open the lid and fill the Kettle with water.
CAUTION: Do not overfill the product or operate it when empty.
3. Close the lid. Place the Kettle back onto the base unit. Making sure there is no water on
the exterior bottom of the Kettle.
4. Turn the Kettle on by pushing the switch from “O” (off) to “I” (on).
5. The Kettle will automatically switch off to the “O” position once the water has boiled.
The indicator light will turn off.
Note: The Power Switch only works when the Kettle is correctly placed on base.
6. Once kettle reaches boiling and shuts off, lift the Kettle using its handle, from base and
pour out your hot water into your container.
Note: if you need to heat water again, let the appliance rest for 30-60 seconds before
starting again.
7. When heating is complete, make sure the power switch is on the "O" position, and then
unplug the product from the electrical outlet.
WARNING: Always unplug the product from the electrical outlet when it is not in use or
will be left unattended.
8. It is recommended to use distilled water to keep your kettle as clean of impurity buildup
as possible.
Cleaning Your Kettle:
WARNING: Always unplug the product and allow it to cool before cleaning or storing.
NOTICE: To avoid damaging the product, do not pour cold water into the Appliance after use
and do not use abrasive cleaners/pads to clean any part of the product.
• Make sure the Kettle is empty and has had time to cool before handling it.
• Do not run any part of this appliance in the Dishwasher.
• Remove Kettle from base and clean with non-abrasive cleaners and warm soapy water.
• Base should only be cleaned with a soft damp towel and dried before storing. DO NOT USE
RUNNING WATER.
• Dry all parts thoroughly before storing or using again.
Descaling Your Kettle:
We suggest using Distilled Water.
WARNING: Always unplug the product before any cleaning. Dry all parts after every use.
Descale your kettle regularly to avoid tougher stains.
Loading ...
Loading ...
Loading ...