Loading ...
Loading ...
Loading ...
gl
No
Leveling wheels. To raise cabinet,
rotate leveling screw in front of roller
clockwise (Q'_,) using the 3/8" hex nut
driver. See Figure 33.
Using level (front to back) raise wheels
until front of cabinet is 1/4" higher than
rear of cabinet. Doors should close slowly
by themselves when opened 45 °.
i. All wheels should be firmly in contact
with floor.
2. Defrost drain pan.
a. Check to be sure defrost drain pan is
in place underneath defrost water drain
tube (left side, behind grille, under
refrigerator). Front of pan is marked.
Make sure it is pushed all the way back -
and held securely in place on glide
supports on either side of refrigerator
cabinet. The pan will rattle if not
properly placed on glides.
3. Toe grille.
a. Replace grille at bottom front of
refrigerator.
LEVELING SCREW
SOCKET
WRENCH ADJUSTABLE
FRONT WHEEL
Figure 33
Loading ...
Loading ...
Loading ...