Loading ...
Loading ...
Loading ...
Ice Maker Service Checks
If preceding installation instructions were
carefully followed, there is little chance that
ice maker will fail to function properly. In the
event that ice maker does fail to function prop-
erly, the following checks should be made by
you, the owner, prior to contacting an author-
ized Amana Servicer. In general, give ice maker
one overnight period before assuming that a
problem exists.
NOTE:Ice maker is designed to produce
up to eight (8) pounds of ice in a 24 hour
period under ideal conditions of room
temperature, water inlet pressure and
freezer compartment interior tempera-
ture. If low ice production is experienced,
preceding conditions should be considered
before assuming a problem with ice maker
itself. A freezer compartment interior
temperature above +2 ° F will noticeably
affect ice production, as will room tem-
peratures above 75 °F.
WARNING: Toavoidrisk
of electrical shock, which can cause
severe personal injury or death, discon-
nect refrigerator from its power source
before attempting any disassembly.
1. Check to make sure that saddle valve
installed on household water pipe is fully turned
on (handle fully counterclockwise).
2. Make sure that ice maker wiring harness
plug pins are fully inserted into their proper
holes in receptacle at rear of freezer
compartment.
3. Check closely for kinks in either copper
tube or in plastic tube, which could block the
flow of water to ice maker. Remove kinks or
replace kinked tube, as appropriate.
4. Remove lower rear cover from refrigerator
and check electrical connections to water valve
coil. The plugs must be tight on spade terminals
of water valve coil. Replace lower rear cover
before returning refrigerator to normal use.
Refrigerator will not operate properly with this
cover removed.
!
Loading ...
Loading ...
Loading ...