Tripp Lite SRCABLEVRT12 Owner's Manual

Loading ...

Double-Depth Installation (SRCABLEVRT6 & SRCABLEVRT12 only)

Step 5 Align the mounting buttons with the toolless

mounting slots on the side of the rack. Insert

the mounting buttons through the slots and

slide the cable trays downward until secure.

Use (4) M4 x 12 mm pan head screws inside of

the rack rail to fasten the cable trays in place.

Step 6 Repeat Steps 1-5 to assemble and mount the

other four cable trays, then use (4) tie plates and

(12) M4 x 8 mm screws to connect adjacent cable

trays vertically and horizontally for added stability.

•Use(1)tieplateand(4)M4x8mmscrewsto

connect the bottom cable trays to the middle

cable trays. This will also connect the cable trays

back-to-back.

•Use(1)tieplateand(4)M4x8mmscrewsto

connect the top cable trays to the middle cable

trays. This will also connect the cable trays back-

to-back.

SIDE VIEW

SCREWS

CABLE TRAY

TIE

PLATE

201202097 93-3029-EN with Addendum.indd 8 3/5/2012 12:15:16 PM

Loading ...

Tripp Lite SRCABLEVRT12 SmartRack 12-in. 30.48 cm Width High Capacity Vertical Cable Manager - Double finger duct