Loading ...
Loading ...
Loading ...
18
Step 4 Slide (6) door hinges over the edges of (3) cable
tray door straps, then fasten the door straps to the
cable guides via the door hinges’ C clasps. After
installation, you can release the C clasps on one
side of the cable tray door straps to open them
from either side.
Step 5 Align the mounting buttons with the toolless
mounting slots on the enclosure’s PDU manager, so
that the SRCABLEVRT3 is facing the center of the
rack. Insert the mounting buttons through the slots
and slide the cable tray downward until secure.
Note: Always begin installation at the bottom of the
rack and work your way to the top.
Step 6 Repeat steps 1-5 to assemble and mount the other
two cable trays.
42U Enclosure with PDU Manager Installation Side-Facing (SRCABLEVRT3 only)
201202097 93-3029-EN with Addendum.indd 18 3/5/2012 12:16:40 PM
Loading ...
Loading ...